Belden 8214 010, Coax RG 8 U Type Black

Belden 8214 010 is a 50 Ohm RG-8/U type coax designed for wireless transmission in point-to-point and point-to-multipoint antenna systems. It features an 11 AWG (7x19) BC - Bare Copper conductor, PE - Polyethylene (Foam) insulation, and a 95% Bare Copper (BC) braid shield. The black PVC - Polyvinyl Chloride jacket is listed for Indoor/Outdoor, Indoor, and Aerial - Black only installations when supported by messenger wire.

Belden 8214 010 Key Features

• This is a 50 Ohm RG-8/U type coax for wireless transmission in point-to-point and point-to-multipoint antenna systems.
• It uses an 11 AWG (7x19) BC - Bare Copper conductor.
• A 95% Bare Copper (BC) braid shield provides shielding coverage.
• The black PVC - Polyvinyl Chloride jacket is suitable for Indoor/Outdoor, Indoor, and Aerial - Black only installations when supported by messenger wire.

Belden 8214 010 Applications

• Use it for point-to-point and point-to-multipoint wireless antenna communication where a coax feedline is needed between system components.
• Wireless microphones use this coax type to connect RF equipment in audio and event setups.
• In two-way radios installations, it routes RF signals between radios and antenna systems.
• For amateur (ham) radio setups, it supports RF connections in station and antenna configurations.
• Low power FM systems use it to support RF signal paths within broadcast-related antenna installations.
• GPS equipment uses it for RF connectivity in positioning and antenna signal routing.
• In RFID (Radio Frequency Identification) systems, it connects RFID components where coaxial RF cabling is required.

Belden™ and all associated trademarks are the property of their respective owners.