Belden 8237 010, RG 8 U Coax 13 AWG 95% Braid PVC
SKU:Belden 8237 010
$570.00
● In stock
Description
Belden 8237 010 is an RG-8/U 50 Ohm wireless transmission coax with a 13 AWG (7x21) BC - Bare Copper conductor, PE - Polyethylene insulation, and a PVC - Polyvinyl Chloride jacket. A 95% Bare Copper (BC) braid shield supports RF shielding. This coax is rated 300 V (CMH) with UL temperature 75°C and operating -40°C to +75°C.
Belden 8237 010 Key Features
- RG-8/U coaxial construction with 50 Ohm characteristic impedance for wireless transmission coax runs.
- 13 AWG (7x21) BC - Bare Copper conductor paired with PE - Polyethylene insulation.
- 95% Bare Copper (BC) braid shield for RF shielding.
- PVC - Polyvinyl Chloride jacket in black with 0.403 in (10.2 mm) nominal overall diameter.
- Rated 300 V (CMH) with UL temperature 75°C and operating -40°C to +75°C.
Belden 8237 010 Applications
- Use it for point-to-point and point-to-multipoint wireless antenna communication where a coax feedline is needed between RF equipment and antennas.
- Support wireless microphones by providing a coax connection for RF signal transmission in audio and event setups.
- Connect RF components in two-way radio systems.
- Install it in amateur (ham) radio systems for RF signal runs between radios and antennas.
- Route RF signals within low power FM broadcast signal chains.
- Use it in GPS installations where a coax connection is required for GPS signal transmission.
- Connect RFID (Radio Frequency Identification) RF components where coaxial signal routing is required.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| RG type | 8 |
| Coax Type | RG 8 |
| Transmission type | 50 Ohm Wireless Transmission Coax |
| Conductor nominal diameter | 0.085 in |
| Insulation diameter (nom.) | 0.285 in (7.24 mm) |
| Insulation color code | White |
| Bulk cable weight | 102 lbs/1000ft |
| Velocity of propagation (nom.) | 66% |
| Capacitance Cond-to-Shield (nom.) | 30.8 pF/ft (101 pF/m) |
| Conductor DCR (nom.) | 1.8 Ohm/1000ft |
| Outer shield DCR (nom) | 1.2 Ohm/1000ft (3.9 Ohm/km) |
| Attenuation @ 1 MHz | 0.2 dB/100ft |
| Attenuation @ 10 MHz | 0.6 dB/100ft |
| Attenuation @ 50 MHz | 1.3 dB/100ft |
| Attenuation @ 100 MHz | 1.9 dB/100ft |
| Attenuation @ 200 MHz | 2.8 dB/100ft |
| Attenuation @ 400 MHz | 4.2 dB/100ft |
| Attenuation @ 700 MHz | 5.9 dB/100ft |
| Attenuation @ 900 MHz | 6.9 dB/100ft |
| Attenuation @ 1000 MHz | 7.4 dB/100ft |
| Attenuation @ 4000 MHz | 23.2 dB/100ft |
| Power rating @ 50 MHz | 1,200 W |
| Power rating @ 100 MHz | 800 W |
| Power rating @ 400 MHz | 320 W |
| Power rating @ 1,000 MHz | 180 W |
| Installation min. | 4.5 in (110 mm) |
| Max Pull Tension | 190 lbs (86 kg) |
| CEC / C(UL) compliance | CMH |
| NEC / UL compliance | CMX |
| CPR Euroclass | Eca |
| Environmental suitability | Outdoor - Aerial, Indoor, Aerial - Black only, When supported by messenger Wire |
| Sustainability | CA Prop 65 |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| UK regulation compliance | UKCA Mark |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 8237 010100; 8237 010250; 8237 010500; 8237 0101000 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.