Belden 8262 010, M17 155 00001 50 Ohm Coax Black
SKU:Belden 8262 010
$255.60
● In stock
Description
Belden 8262 010 is a Mil-Spec coaxial cable built to M17/155-00001 with 50 Ohm impedance and RG-58 construction. It uses a 20 AWG (19x33) TC - Tinned Copper conductor with PE - Polyethylene insulation and a 95% Tinned Copper (TC) braid shield. The black PVC - Polyvinyl Chloride (Non-Contaminating) jacket is specified for Outdoor - Aerial and Indoor use when supported by messenger wire.
Belden 8262 010 Key Features
- Mil-Spec coax built to M17/155-00001 with RG type: 58 construction.
- 50 Ohm characteristic impedance (nominal) for coaxial signal transmission.
- 20 AWG (19x33) TC - Tinned Copper conductor with PE - Polyethylene insulation.
- 95% Tinned Copper (TC) braid shield for consistent shielding coverage.
- Black PVC - Polyvinyl Chloride (Non-Contaminating) jacket with environmental suitability listed as Outdoor - Aerial and Indoor, when supported by messenger wire.
Belden 8262 010 Applications
- Support point-to-point and point-to-multipoint wireless antenna communication links.
- Use in wireless microphones where coaxial signal routing is required.
- Connect Two-Way Radios for RF interconnects.
- Fit Amateur (Ham) Radio setups for general RF connectivity.
- Work in Low Power FM systems for RF signal connections.
- Apply to GPS installations that require coaxial cabling.
- Enable RFID (Radio Frequency Identification) connections in RF signal paths.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Type | Mil-Spec coax |
| Mil spec | M17/155-00001 |
| Coax construction | Coaxial |
| Conductor nominal diameter | 0.035 in |
| Insulation nominal diameter | 0.115 in (2.92 mm) |
| Insulation color code | White |
| Outer shield type | Braid |
| Jacket Color | Black |
| Overall cable diameter (nominal) | 0.195 in (4.95 mm) |
| Flooded | No not flooded over braid |
| Bulk cable weight | 24 lbs/1000ft |
| Voltage Rating | 1400 V (Mil-Spec) |
| Nom. conductor DCR | 10.8 Ohm/1000ft |
| Nom. outer shield DCR | 4.1 Ohm/1000ft (13 Ohm/km) |
| Nom. capacitance (Cond-to-Shield) | 30.8 pF/ft (101 pF/m) |
| Nom. velocity of prop. | 66% |
| Attenuation (nominal) 1 MHz | 0.4 dB/100ft |
| Attenuation (nominal) 10 MHz | 1.4 dB/100ft |
| Attenuation (nominal) 50 MHz | 3.3 dB/100ft |
| Attenuation (nominal) 100 MHz | 4.9 dB/100ft |
| Attenuation (nominal) 200 MHz | 7.3 dB/100ft |
| Attenuation (nominal) 400 MHz | 11.5 dB/100ft |
| Attenuation (nominal) 700 MHz | 17.0 dB/100ft |
| Attenuation (nominal) 900 MHz | 20.0 dB/100ft |
| Attenuation (nominal) 1000 MHz | 21.5 dB/100ft |
| Power rating (max.) 50 MHz | 300 W |
| Power rating (Max.) 100 MHz | 200 W |
| Power rating (Max.) 400 MHz | 90 W |
| Power rating (Max.) @ 1,000 MHz | 55 W |
| Operating temperature | -40°C to +85°C |
| Minimum bend radius (installation) | 2 in (51 mm) |
| Max Pull Tension | 42 lbs (19 kg) |
| Military compliance | Commercial, non-QPL product (M17/155-00001) |
| CPR compliance | CPR Euroclass: Eca |
| Sustainability | CA Prop 65 |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| UK regulation compliance | UKCA Mark |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 8262 010100; 8262 010250; 8262 010500; 8262 0101000 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.