Belden 9258 010, Coax RG 8X Black

Belden 9258 010 is a 50 Ohm wireless transmission coax for point-to-point and point-to-multipoint antenna communication. It is built as an RG-8X style coax with a 16 AWG (19x29) BC - Bare Copper conductor, PE - Polyethylene (Foam) insulation, a 95% Bare Copper braid shield, and a PVC - Polyvinyl Chloride jacket in black. Key electrical characteristics include a nom. velocity of prop. of 82%, nom. capacitance Cond-to-Shield of 25.3 pF/ft (83.0 pF/m), and a UL voltage rating of 300 V (CM). It is specified for Indoor/Outdoor suitability and has an operating temperature range of -40°C to +80°C.

Belden 9258 010 Key Features

• 50 Ohm wireless transmission coax for point-to-point and point-to-multipoint antenna communication.
• RG-8X style coax with a 16 AWG (19x29) BC - Bare Copper conductor.
• PE - Polyethylene (Foam) insulation with a 95% Bare Copper braid shield.
• PVC - Polyvinyl Chloride jacket in black.
• UL voltage rating: 300 V (CM).
• Operating temperature: -40°C to +80°C.
• Environmental suitability: Indoor/Outdoor, Indoor, Aerial - Black only, When supported by messenger Wire.

Belden 9258 010 Applications

• Use it for point-to-point and point-to-multipoint wireless antenna communication where a 50 Ohm coax is specified.
• Wireless microphones commonly use this coax for RF signal connections in audio and event setups.
• In two-way radios installations, it connects radio equipment and antenna systems.
• For amateur (Ham) radio setups, it is used for antenna feedline connections.
• Low power FM systems use it for RF signal transmission between equipment and antennas.
• GPS installations use it to connect GPS equipment where coaxial RF cabling is required.
• RFID (Radio Frequency Identification) systems use it for RF connectivity between RFID components.

Belden™ and all associated trademarks are the property of their respective owners.