Belden 9778 010, Coax 1C 20 AWG EPDM SH CPE Chrome, Black Jacket

Belden 9778 010 is a 1-conductor coax cable with a 20 AWG stranded (26x34) TC - tinned copper (high conductivity) conductor, EPDM - ethylene propylene diene monomer insulation, and a CPE jacket. It features a multi-layer shield system with Textile (Conductive) coverage of 100%, a Tinned Copper (TC) spiral shield with 75% coverage, and a Tape layer with 100% coverage. This cable is specified for 40 Ohm nominal characteristic impedance, 45 pF/ft nominal capacitance conductor to shield, and a 300 V RMS non-UL voltage rating. It is intended for indoor (not riser or plenum) environments.

Belden 9778 010 Key Features

• 1-conductor coax cable design with a 20 AWG stranded (26x34) TC - tinned copper (high conductivity) conductor.
• EPDM - ethylene propylene diene monomer insulation with 0.117 in nominal diameter.
• Multi-layer shielding includes Textile (Conductive) (100%), plus Tinned Copper (TC) (75%) and Tape (100%).
• CPE jacket with Paper Tape separator and Black jacket color.
• Electrical characteristics include 40 Ohm nominal characteristic impedance and 45 pF/ft nominal capacitance conductor to shield.
• Non-UL voltage rating: 300 V RMS.
• Temperature ratings include non-UL temp rating: 60°C and operating temperature range: -30°C to +60°C.
• Environmental space: indoor (not riser or plenum); plenum (Y/N): No.

Belden 9778 010 Applications

• Designed for indoor (not riser or plenum) installations where a coax cable is required.
• Supports signal and power performance in indoor environments.
• Works well for indoor use where a multi-layer shield system is needed for added protection.

Belden™ and all associated trademarks are the property of their respective owners.