Belden 9913 010, Coax RG 8 U Type Black

Belden 9913 010 is a 50 Ohm coaxial cable with RG type: 8 construction, built with a 10 AWG solid BC - Bare Copper conductor and PE - Polyethylene (Semi-Solid) insulation. It uses a black PVC - Polyvinyl Chloride jacket and is listed for Indoor (Not Riser or Plenum) use, with Indoor, Aerial - Black only installation when supported by messenger wire. For shielding, it combines Duobond® II tri-laminate tape (Alum+Poly+Alum) at 100% coverage with a 90% Tinned Copper (TC) braid.

Belden 9913 010 Key Features

• This is a 50 Ohm coaxial cable with RG type: 8 construction for wireless transmission coax applications.
• It features a 10 AWG solid BC - Bare Copper conductor.
• Shielding includes Duobond® II tri-laminate tape (Alum+Poly+Alum), 100%, plus a 90% Tinned Copper (TC) braid in a braid over foil design.
• The black PVC - Polyvinyl Chloride jacket is rated for Environmental suitability: Indoor (Not Riser or Plenum), Indoor, Aerial - Black only, when supported by messenger wire.
• Voltage rating is 600V RMS.

Belden 9913 010 Applications

• Use it for point-to-point and point-to-multipoint wireless antenna communication links.
• Choose it for wireless microphones where a coax connection is needed.
• Deploy it with Two-Way Radios in RF signal transmission setups.
• Install it in Amateur (Ham) Radio systems that require 50 Ohm coax.
• Specify it for Low Power FM signal transmission applications.
• Connect it in GPS systems where coaxial RF cabling is required.
• Integrate it into RFID (Radio Frequency Identification) systems that use coaxial RF cabling.

Belden™ and all associated trademarks are the property of their respective owners.