Belden 9913F7 B59, Coax RG 8 U 10 AWG FHDPE SH PVC Black
Description
Belden 9913F7 B59 is a flexible RG-8 wireless transmission coax with a 10 AWG (7x18) BC - Bare Copper conductor, PE - Polyethylene (Foam) insulation, and a PVC - Polyvinyl Chloride jacket. It features a dual shield system using Duobond® II tri-laminate tape (100%) plus a 90% Tinned Copper (TC) braid for interference protection. Electrical performance includes a nominal characteristic impedance of 52 Ohm (Actual Impedance specification is 51.5 +/- 2 ohms.), a voltage rating of 600 V, and a nominal velocity of prop. of 85%. VSWR is specified at 1.43:1 from 5-2250 MHz, with nominal attenuation and max. power rating values provided across multiple frequencies.
Belden 9913F7 B59 Key Features
- Flexible RG-8 wireless transmission coax construction for RF signal transmission.
- 10 AWG (7x18) BC - Bare Copper conductor for the center conductor build.
- PE - Polyethylene (Foam) insulation with white insulation color code.
- Dual shield design: Duobond® II tri-laminate tape (100%) plus 90% Tinned Copper (TC) braid.
- PVC - Polyvinyl Chloride jacket for the outer cable covering.
- Nominal characteristic impedance: 52 Ohm (Actual Impedance specification is 51.5 +/- 2 ohms.).
- Voltage rating: 600 V.
- Operating temperature: -40°C to +80°C.
Belden 9913F7 B59 Applications
- Designed for point-to-point and point-to-multipoint wireless antenna communication.
- Well-suited for wireless microphones where RF transmission coax is required.
- Supports Two-Way Radios in wireless communication setups.
- Used in Amateur (Ham) Radio installations.
- Applicable for Low Power FM systems.
- Suitable for GPS connections where coaxial RF transmission is needed.
- Used for RFID (Radio Frequency Identification) connectivity.
Belden™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Coax construction | Coaxial |
| RG type | 8 |
| Conductor nominal diameter | 0.108 in |
| Nominal insulation diameter | 0.284 in (7.21 mm) |
| Overall cable diameter (nominal) | 0.405 in (10.3 mm) |
| Bulk cable weight | 104 lbs/1000ft |
| Nominal conductor DCR | 1.1 Ohm/1000ft |
| Nominal outer shield DCR | 1.8 Ohm/1000ft (5.9 Ohm/km) |
| Nominal Capacitance (Cond-to-Shield) | 22.5 pF/ft (73.8 pF/m) |
| Nominal velocity of prop. | 85% |
| VSWR frequency range | 5-2250 MHz |
| Max. VSWR | 1.43:1 |
| Attenuation (Nominal) | 10 MHz: 0.6 dB/100ft; 50 MHz: 1.1 dB/100ft; 100 MHz: 1.5 dB/100ft; 200 MHz: 2.0 dB/100ft; 400 MHz: 3.0 dB/100ft; 700 MHz: 4.0 dB/100ft; 900 MHz: 4.7 dB/100ft; 1000 MHz: 5.0 dB/100ft; 2000 MHz: 7.5 dB/100ft; 2250 MHz: 8.0 dB/100ft; 3000 MHz: 9.8 dB/100ft; 4000 MHz: 12.1 dB/100ft |
| Power rating (max.) | 5 MHz: 3,217 W; 10 MHz: 2,681 W; 50 MHz: 1,463 W; 100 MHz: 1,073 W; 200 MHz: 805 W; 400 MHz: 575 W; 700 MHz: 424 W; 1,000 MHz: 350 W; 1,500 MHz: 278 W; 2,000 MHz: 237 W; 3,000 MHz: 188 W; 4,000 MHz: 157 W |
| Minimum bend radius (installation) | 4 in (100 mm) |
| Max Pull Tension | 210 lbs (95 kg) |
| Environmental suitability | Indoor (Not Riser or Plenum), Indoor, Aerial - Black only, When supported by messenger Wire |
| Sustainability | CA Prop 65 |
| CPR compliance | CPR Euroclass: Eca |
| European directive compliance | EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE) |
| UK regulation compliance | UKCA Mark |
| APAC compliance | China RoHS II (GB/T 26572-2011) |
| Item Type | Belden Coaxial Cable |
| Other Part Numbers | 9913F7 B59100, 9913F7 B59250, 9913F7 B59500, 9913F7 B591000, UPC 612825261735 |
| Priced Per | FT |
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.