CommScope 107001687 1061C YL 4/24 W1000, Copper Cable PowerSUM Cat5e 24 AWG 4PR UTP PVC

SYSTIMAX® PowerSUM 1061C is a Category 5e U/UTP horizontal twisted pair cable built with 24 AWG solid bare copper conductors and a yellow PVC jacket. It uses a 4-pair (8-conductor) construction with polyolefin insulation and supports data applications up to 200 MHz. 1061C supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class D, and it fully complies with IEEE 802.3bt (Type 4) remote powering recommendations when installed according to the specified installation standards.

Key Features

• Category 5e U/UTP (unshielded) twisted pair cable for horizontal installations.
• 4 pairs (8 conductors) using 24 AWG solid bare copper conductors.
• Polyolefin insulation with a yellow PVC jacket.
• Operating frequency, maximum: 200 MHz.
• Transmission standards: ANSI/TIA-568.2-D | CENELEC EN 50288-3-1 | ISO/IEC 11801 Class D.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	PowerSUM
Product type	Twisted pair cable
Product number	1061C
Cable component type	Horizontal
Operating voltage, maximum	80 V
DC resistance, maximum	9.38 ohms/100 m | 2.859 ohms/100 ft
DC resistance unbalance, maximum	5 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	69 %
Cable length	304.8 m | 1000 ft
Diameter over jacket, nominal	5.207 mm | 0.205 in
Jacket thickness	0.559 mm | 0.022 in
Pulling tension, maximum	11.34 kg | 25 lb
Environmental space	Non-Plenum
Flame test method	CM
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Packaging type	WE TOTE® box
Weight	29.168 kg/km | 19.6 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in structured cabling environments for data applications up to 200 MHz.
• Support installations that follow ANSI/TIA-568.2-D, CENELEC EN 50288-3-1, and ISO/IEC 11801 Class D requirements.
• Deploy for IEEE 802.3bt (Type 4) remote powering when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.