CommScope 107147787 1061C WH 4/24 W1000, Cat5e U UTP CM White 4 Pair

SYSTIMAX® PowerSUM 1061C is a Category 5e U/UTP horizontal twisted pair cable built with 24 AWG solid bare copper conductors and a white PVC jacket. This 4-pair, 8-conductor cable supports ANSI/TIA-568.2-D, CENELEC EN 50288-3-1, and ISO/IEC 11801 Class D transmission standards, with an operating frequency, maximum of 200 MHz. It is rated CM for non-plenum environments and is supplied in a 304.8 m | 1000 ft WE TOTE® box.

Key Features

• Category 5e U/UTP (unshielded) horizontal twisted pair cable for structured cabling installations.
• 24 AWG solid bare copper conductors in a 4-pair, 8-conductor construction.
• White PVC jacket with polyolefin insulation material.
• Transmission standards: ANSI/TIA-568.2-D | CENELEC EN 50288-3-1 | ISO/IEC 11801 Class D.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• CM flame test method for non-plenum environmental space.
• Supplied in a 304.8 m | 1000 ft WE TOTE® box.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	PowerSUM
Product type	Twisted Pair Cable
Product number	1061C
Cable component type	Horizontal
Operating frequency, maximum	200 MHz
Nominal velocity of propagation (NVP)	69 %
Operating voltage, maximum	80 V
Dielectric strength, minimum	1500 Vac | 2500 Vdc
DC resistance, maximum	9.38 ohms/100 m | 2.859 ohms/100 ft
DC resistance unbalance, maximum	5 %
Mutual capacitance at frequency	5.6 nF/100 m @ 1 kHz
Diameter over jacket, nominal	5.207 mm | 0.205 in
Jacket thickness	0.559 mm | 0.022 in
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Weight	29.168 kg/km | 19.6 lb/kft
Packaging type	WE TOTE® box
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in horizontal network cabling runs where Category 5e performance is required under the listed transmission standards.
• Install in non-plenum environments where a CM flame test method rating is specified.
• Enable remote powering deployments aligned with IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.