CommScope 3091B OR 4/23 W1000 760236037, CAT6A F/UTP 4 Pair 23 AWG Orange

SYSTIMAX® 3091B GigaSPEED X10D® is a Category 6A U/UTP (Unshielded) twisted pair cable with solid 23 AWG Bare Copper conductors for horizontal LAN installations. It supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA, with an operating frequency up to 550 MHz. The Low Smoke Zero Halogen (LSZH) orange jacket and isolator separator help maintain pair geometry for consistent performance. Supplied in a 304.8 m | 1000 ft WE TOTE® box.

Key Features

• Category 6A twisted pair cable for horizontal installations.
• U/UTP (Unshielded) design with 4 pairs and 8 conductors.
• Solid 23 AWG Bare Copper conductors.
• Low Smoke Zero Halogen (LSZH) jacket in orange.
• Isolator separator to help maintain pair geometry.
• Transmission standards: ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA.
• Operating frequency, maximum: 550 MHz.
• Packaging type: WE TOTE® box; cable length: 304.8 m | 1000 ft.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Product number	3091B
Cable component type	Horizontal
Insulation material	Polyolefin
Separator material	Polyolefin
Separator 2 material	Polyolefin
Nominal velocity of propagation (NVP)	67 %
Remote powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Segregation class	c
dc resistance, maximum	7.61 ohms/100 m | 2.32 ohms/100 ft
dc resistance unbalance, maximum	4 %
Dielectric strength, minimum	2500 Vdc
Mutual capacitance	6.0 nF/100 m @ 1 kHz
Operating voltage, maximum	80 V
Diameter over insulated conductor	0.864 mm | 0.034 in
Diameter over jacket, nominal	7.239 mm | 0.285 in
Jacket thickness	1.295 mm | 0.051 in
Pulling tension, maximum	11.34 kg | 25 lb
Environmental space	Low Smoke Zero Halogen (LSZH)
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Acid gas test method	IEC 60754-2
Flame test method	IEC 60332-3-22
Smoke test method	IEC 61034-2
EN50575 CPR EuroClass fire performance	Dca
EN50575 CPR EuroClass smoke rating	s2
EN50575 CPR EuroClass droplets rating	d2
EN50575 CPR EuroClass acidity rating	a1
CENELEC	EN 50575 compliant, Declaration of Performance (DoP) available
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant
Weight	54.913 kg/km | 36.9 lb/kft

Applications

• Used in horizontal LAN installations where high-performance data transmission is required.
• Fits sensitive environments where a Low Smoke Zero Halogen (LSZH) cable is specified.
• Meets deployments that follow ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA requirements.
• Enables IEEE 802.3bt (Type 4) remote powering recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.