CommScope 760053850 D-024-LN-8W-F12NS, OS2 Single Mode 24 Fiber Outdoor Cable

CommScope® 760053850 D-024-LN-8W-F12NS is a D-LN series fiber OSP cable with a stranded loose tube, non-armored, gel-free construction. It is built with 24 fibers (12 fibers per subunit across 2 subunits) using G.652.D and G.657.A1, TeraSPEED® | OS2. The cable has a black PE jacket that is UV stabilized and marked in feet. It is specified for aerial, lashed | buried environments and includes defined mechanical, environmental, and compliance requirements.

Key Features

• CommScope® D-LN series fiber OSP cable
• Stranded loose tube design with non-armored, gel-free construction
• 24-fiber build with 12 fibers per subunit across 2 subunits
• Fiber type: G.652.D and G.657.A1, TeraSPEED® | OS2
• Black PE jacket that is UV stabilized and marked in feet
• Environmental space: aerial, lashed | buried
• Diameter over jacket: 10.2 mm | 0.402 in
• Weight: 63 kg/km | 42.334 lb/kft

Technical Specs

Manufacturer	CommScope®
Product type	Fiber OSP Cable
Product series	D-LN
All-dielectric	Yes
Armored	No
Rodent protected	No
Self-support	No
Filler quantity	3
Buffer tube/subunit diameter	2.5 mm | 0.098 in
Minimum bend radius, unloaded	102 mm | 4.016 in
Minimum bend radius, loaded	153 mm | 6.024 in
Tensile load, long term, maximum	800 N | 179.847 lbf
Tensile load, short term, maximum	2700 N | 606.984 lbf
Compression	22 N/mm | 125.623 lbf/in
Compression test method	FOTP-41 | IEC 60794-1 E3
Flex	25 cycles
Flex test method	FOTP-104 | IEC 60794-1 E6
Impact	4.41 N-m | 39.032 in lb
Impact test method	FOTP-25 | IEC 60794-1 E4
Strain	See long and short term tensile loads
Strain test method	FOTP-33 | IEC 60794-1 E1
Twist	10 cycles
Twist test method	FOTP-85 | IEC 60794-1 E7
Vertical rise, maximum	1307 m | 4288.058 ft
Installation temperature	-30 °C to +70 °C (-22 °F to +158 °F)
Operating temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Storage temperature	-40 °C to +75 °C (-40 °F to +167 °F)
Water penetration	24 h
Water penetration test method	FOTP-82 | IEC 60794-1 F5
Cable freeze	-2 °C | 28.4 °F
Cable freeze test method	FOTP-98 | IEC 60794-1 F15
Heat age	-40 °C to +85 °C (-40 °F to +185 °F)
Heat age test method	IEC 60794-1 F9
Low high bend	-30 °C to +60 °C (-22 °F to +140 °F)
Low high bend test method	FOTP-37 | IEC 60794-1 E11
Temperature cycle	-40 °C to +70 °C (-40 °F to +158 °F)
Temperature cycle test method	FOTP-3 | IEC 60794-1 F1
Cable qualification standards	ANSI/ICEA S-87-640 | EN 187105 | Telcordia GR-20
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in outside plant deployments where aerial, lashed, or buried installation is required.
• Meet installations that require defined bend radius, tensile, compression, impact, twist, and flex performance limits.
• Fit projects that require UV stabilized jacketing and footage marking for identification and handling.

CommScope™ and all associated trademarks are the property of their respective owners.