CommScope 760053918 D-144-LN-8W-F12NS, OS2 Single Mode 144 Fiber Outdoor Cable

CommScope® 760053918 D-144-LN-8W-F12NS is an OS2 single-mode Fiber OSP Cable with a stranded loose tube, non-armored, all-dielectric design. It uses a gel-free subunit construction with dry water-blocking elements to support cleaner, faster cable preparation. The cable includes 144 fibers arranged as 12 subunits of 12 fibers each and features a black PE jacket that is UV stabilized and marked in feet. It is qualified to ANSI/ICEA S-87-640 | EN 187105 | Telcordia GR-20.

Key Features

• Fiber type: G.652.D and G.657.A1, TeraSPEED® | OS2
• 144 fibers total, organized as 12 subunits with 12 fibers per subunit
• Stranded loose tube construction with a non-armored, all-dielectric design
• Gel-free subunit type with dry water-blocking elements
• Black PE jacket that is UV stabilized and marked in feet
• Cable qualification standards: ANSI/ICEA S-87-640 | EN 187105 | Telcordia GR-20

Technical Specs

Manufacturer	CommScope®
Product type	Fiber OSP Cable
Product series	D-LN
Rodent protected	No
Self-support	No
Buffer tube/subunit diameter	2.5 mm | 0.098 in
Diameter over jacket	15.7 mm | 0.618 in
Weight	153 kg/km | 102.811 lb/kft
Minimum bend radius, unloaded	157 mm | 6.181 in
Minimum bend radius, loaded	236 mm | 9.291 in
Tensile load, long term, maximum	800 N | 179.847 lbf
Tensile load, short term, maximum	2700 N | 606.984 lbf
Compression	22 N/mm | 125.623 lbf/in
Compression test method	FOTP-41 | IEC 60794-1 E3
Impact	5.15 N-m | 45.581 in lb
Impact test method	FOTP-25 | IEC 60794-1 E4
Flex	25 cycles
Flex test method	FOTP-104 | IEC 60794-1 E6
Twist	10 cycles
Twist test method	FOTP-85 | IEC 60794-1 E7
Strain	See long and short term tensile loads
Strain test method	FOTP-33 | IEC 60794-1 E1
Vertical rise, maximum	533 m | 1748.688 ft
Environmental space	Aerial, lashed | Buried
Installation temperature	-30 °C to +70 °C (-22 °F to +158 °F)
Operating temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Storage temperature	-40 °C to +75 °C (-40 °F to +167 °F)
Water penetration	24 h
Water penetration test method	FOTP-82 | IEC 60794-1 F5
Cable freeze	-2 °C | 28.4 °F
Cable freeze test method	FOTP-98 | IEC 60794-1 F15
Heat age	-40 °C to +85 °C (-40 °F to +185 °F)
Heat age test method	IEC 60794-1 F9
Low high bend	-30 °C to +60 °C (-22 °F to +140 °F)
Low high bend test method	FOTP-37 | IEC 60794-1 E11
Temperature cycle	-40 °C to +70 °C (-40 °F to +158 °F)
Temperature cycle test method	FOTP-3 | IEC 60794-1 F1
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in outside plant deployments where an all-dielectric, non-armored construction is required.
• Support aerial, lashed installations in OSP environments.
• Install in buried placement where the specified environmental space applies.
• Streamline field preparation and reduce mess during installation with gel-free subunits and dry water-blocking elements.

CommScope™ and all associated trademarks are the property of their respective owners.