CommScope 760081398 1291B SLT C6A 4/23 F/UTP R1000, Cat 6A 23 AWG 4 Pair Shielded
SKU:760081398 1291B SLT C6A 4/23 F/UTP R1000
● In stock
ft
Minimum order: 1,000 ft · Increments of 1,000 ft
Description
SYSTIMAX® 1291B from the GigaSPEED X10D® line is a Category 6A F/UTP (Shielded) horizontal twisted pair cable with 4 pairs of 23 AWG solid bare copper conductors and a PVC jacket. It supports an operating frequency up to 500 MHz and uses an isolator separator with a polyester/aluminum shield to provide added performance margin in high-bandwidth installations. Supplied on a reel in 304.8 m | 1000 ft length, it is intended for Non-Plenum spaces with a CMR flame test method.
Key Features
- Category 6A F/UTP (Shielded) horizontal twisted pair cable for structured cabling installations.
- 4-pair design with aluminum foil tape and an isolator center member helps provide added performance margin for high-bandwidth applications.
- Operating frequency, maximum: 500 MHz.
- Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
- Environmental space: Non-Plenum; flame test method: CMR.
- Single-jacket construction supports efficient sizing and improved handling.
Technical Specs
| Manufacturer | SYSTIMAX® |
|---|---|
| Product brand | GigaSPEED X10D® |
| Product type | Twisted Pair Cable |
| Product number | 1291B |
| ANSI/TIA category | 6A |
| Cable component type | Horizontal |
| Pairs | 4 |
| Conductors | 8 |
| Conductor type | Solid |
| Conductor gauge | 23 AWG |
| Separator type | Isolator |
| Drain wire type | Solid |
| Drain wire gauge | 26 AWG |
| Conductor material | Bare Copper |
| Insulation material | Polyolefin |
| Shield (tape) material | Polyester/Aluminum Shield |
| Separator material | Polyolefin |
| Drain wire material | Tinned Copper |
| Jacket material | PVC |
| Jacket color | Slate |
| Transmission standards | ANSI/TIA-568.2-D |
| Nominal velocity of propagation (NVP) | 68 % |
| dc resistance, maximum | 8 ohms/100 m | 2.438 ohms/100 ft |
| dc resistance unbalance, maximum | 4 % |
| Dielectric strength, minimum | 1500 Vac | 2500 Vdc |
| Operating voltage, maximum | 80 V |
| LP (Limited Power) rating | 0.5 A |
| Mutual capacitance at frequency | 5.6 nF/100 m @ 1 kHz |
| Cable length | 304.8 m | 1000 ft |
| Diameter over jacket, nominal | 7.518 mm | 0.296 in |
| Jacket thickness | 0.508 mm | 0.02 in |
| Pulling tension, maximum | 11.34 kg | 25 lb |
| Installation temperature | 0 °C to +60 °C (+32 °F to +140 °F) |
| Operating temperature | -20 °C to +60 °C (-4 °F to +140 °F) |
| Packaging type | Reel |
| Weight | 52.086 kg/km | 35 lb/kft |
| CHINA-ROHS | Below maximum concentration value |
| REACH-SVHC | Compliant as per SVHC revision |
| ROHS | Compliant |
| UK-ROHS | Compliant |
Applications
- Use in high-bandwidth network installations where Category 6A performance is required.
- Install in Non-Plenum spaces where a CMR flame test method is specified.
- Deploy for remote powering when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
CommScope™ and all associated trademarks are the property of their respective owners.
Specifications
| Attribute | Value |
|---|---|
| Priced Per | FT |
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.