CommScope 760081406 1291B WHT C6A 4/23 F/UTP R1000, Cat6A 4 Pair 23 AWG Shielded

SYSTIMAX® 1291B from the GigaSPEED X10D® line is a Category 6A F/UTP (Shielded) horizontal twisted pair cable built with 4 pairs (8 conductors) of 23 AWG solid bare copper. It features a white PVC jacket and a polyester/aluminum shield with an isolator separator to support high-bandwidth network installations up to 500 MHz. This cable is supplied on a reel in a 304.8 m | 1000 ft length for structured cabling runs in non-plenum environments.

Key Features

• Category 6A F/UTP (Shielded) horizontal twisted pair cable for structured network cabling.
• 4 pairs (8 conductors) of 23 AWG solid bare copper conductors.
• Polyester/aluminum shield with a solid 26 AWG drain wire (tinned copper) and an isolator separator.
• Supports a maximum operating frequency of 500 MHz.
• White PVC jacket for non-plenum installations with a CMR flame test method listing.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Product number	1291B
ANSI/TIA category	6A
Cable component type	Horizontal
Transmission standards	ANSI/TIA-568.2-D
Nominal velocity of propagation (NVP)	68 %
DC resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
DC resistance unbalance, maximum	4 %
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Operating voltage, maximum	80 V
LP (Limited Power) rating	0.5 A
Insulation material	Polyolefin
Separator material	Polyolefin
Cable length	304.8 m | 1000 ft
Diameter over jacket, nominal	7.518 mm | 0.296 in
Jacket thickness	0.508 mm | 0.02 in
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Packaging type	Reel
Weight	52.086 kg/km | 35 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use it for high-bandwidth network installations where Category 6A performance is required.
• Install it in horizontal cabling runs in non-plenum building spaces.
• Deploy it in systems that follow ANSI/TIA-568.2-D transmission standards.
• Support remote powering deployments when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.