CommScope 760105759 1091B BLU C6A 4/23 U/UTP R1000, Cat 6A 23 AWG 4 Pair UTP

SYSTIMAX® 1091B GigaSPEED X10D® is a Category 6A U/UTP horizontal twisted pair cable built with solid 23 AWG bare copper conductors in a 4-pair (8-conductor) construction. This blue, non-plenum riser (CMR) cable is rated for performance up to 550 MHz and supports network line speeds up to 10 gigabits per second. Supplied on a reel in 304.8 m | 1000 ft lengths, it is designed to help optimize transmission performance with a reduced cable diameter.

Key Features

• Category 6A U/UTP (unshielded) horizontal twisted pair cable for structured cabling installations.
• Solid 23 AWG bare copper conductors in a 4-pair (8-conductor) construction.
• Rated to an operating frequency, maximum of 550 MHz, and supports network line speeds up to 10 gigabits per second.
• Transmission standards: ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Environmental space: Non-plenum; flame test method: CMR.
• OMT platform reduces cable diameter while optimizing transmission performance.
• Packaged on a reel with cable length: 304.8 m | 1000 ft.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted Pair Cable
Product number	1091B
ANSI/TIA category	6A
Cable component type	Horizontal
Cable type	U/UTP (Unshielded)
Pairs	4
Conductors	8
Conductor type	Solid
Conductor gauge	23 AWG
Separator type	Isolator
Jacket color	Blue
Characteristic impedance	100 ohm
Impedance tolerance	±15 ohm
dc resistance, maximum	7.61 ohms/100 m | 2.32 ohms/100 ft
dc resistance unbalance, maximum	4 %
Mutual capacitance	6.0 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	65 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Operating voltage, maximum	80 V
LP (Limited Power) rating	0.5 A
Diameter over jacket, nominal	7.239 mm | 0.285 in
Jacket thickness	1.295 mm | 0.051 in
Diameter over insulated conductor	0.864 mm | 0.034 in
Conductor material	Bare Copper
Insulation material	Polyolefin
Jacket material	PVC
Separator material	Polyolefin
Separator 2 material	Polyolefin
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Temperature rating, UL	90 °C | 194 °F
Packaging type	Reel
Weight	55.508 kg/km | 37.3 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in high-bandwidth network infrastructure where Category 6A performance is required.
• Installations can follow ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA transmission standards.
• Remote powering deployments per IEEE 802.3bt (Type 4) are supported when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Intended for non-plenum riser (CMR) environments.

Shipping & Availability

• Cable length: 304.8 m | 1000 ft.
• Packaging type: Reel.

CommScope™ and all associated trademarks are the property of their respective owners.