CommScope 760107102 1091B LBL C6A 4/23 U/UTP W1000, Riser 4 Pair 23 AWG Light Blue

SYSTIMAX® 1091B from the GigaSPEED X10D® line is a Category 6A U/UTP (unshielded) twisted pair horizontal cable built with solid 23 AWG bare copper conductors and a light blue PVC jacket. It supports an operating frequency up to 550 MHz and network line speeds up to 10 gigabits per second. This 4-pair, 1000 ft (304.8 m) non-plenum cable uses the OMT platform to reduce cable diameter while optimizing transmission performance.

Key Features

• Category 6A U/UTP (unshielded) twisted pair horizontal cable for structured LAN cabling.
• Solid 23 AWG bare copper conductors with 4 pairs (8 conductors).
• Light blue PVC jacket.
• Operating frequency, maximum: 550 MHz.
• Application support: Supports network line speeds up to 10 gigabits per second.
• Transmission standards: ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Design highlights: OMT platform reduces cable diameter while optimizing transmission performance.
• Warranty eligibility: Qualifies for the SYSTIMAX 20-Year Extended Product Warranty and Applications Assurance when included as part of a registered SYSTIMAX GigaSPEED X10D channel.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted Pair Cable
Product number	1091B
Cable component type	Horizontal
Separator type	Isolator
Cable length	304.8 m | 1000 ft
Diameter over insulated conductor	0.864 mm | 0.034 in
Diameter over jacket, nominal	7.239 mm | 0.285 in
Jacket thickness	1.295 mm | 0.051 in
Characteristic impedance	100 ohm
Impedance tolerance	±15 ohm
DC resistance, maximum	7.61 ohms/100 m | 2.32 ohms/100 ft
DC resistance unbalance, maximum	4 %
Mutual capacitance	6.0 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	65 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Operating voltage, maximum	80 V
LP (Limited Power) rating	0.5 A
Conductor material	Bare Copper
Insulation material	Polyolefin
Jacket material	PVC
Separator material	Polyolefin
Separator 2 material	Polyolefin
Pulling tension, maximum	11.34 kg | 25 lb
Environmental space	Non-Plenum
Flame test method	CMR
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Temperature rating, UL	90 °C | 194 °F
Packaging type	WE TOTE® box
Weight	55.508 kg/km | 37.3 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use it for high-performance LAN installations.
• Deploy it in standards-based structured cabling that follows ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA.
• Install it per ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A to align with IEEE 802.3bt (Type 4) remote powering recommendations.

CommScope™ and all associated trademarks are the property of their respective owners.