CommScope 760122655 2291B SLT C6A 4/23 F/UTP R1000, Plenum 4 Pair 23 AWG PVC Jacket

CommScope 760122655 2291B is a SYSTIMAX® GigaSPEED X10D® Category 6A F/UTP (Shielded) twisted pair cable for horizontal LAN installations. It features 4 pairs (8 Solid Bare Copper Conductors) with FEP insulation and a PVC jacket in Slate. This plenum cable supports operation up to 500 MHz and complies with ANSI/TIA-568.2-D. Supplied on a reel, it comes in a 304.8 m | 1000 ft length and complies with IEEE 802.3bt (Type 4) remote powering recommendations when installed according to the listed standards.

Key Features

• Category 6A twisted pair cable with F/UTP (Shielded) construction for horizontal installations.
• 4 pairs (8 Solid Bare Copper Conductors) with 23 AWG solid conductors.
• Aluminum/Poly foil shield with a Solid 26 AWG Tinned Copper drain wire.
• Supports operation up to 500 MHz and complies with ANSI/TIA-568.2-D.
• Plenum-rated with CMP/FT6 flame and smoke test methods.
• Supplied on a reel in a 304.8 m | 1000 ft length.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Cable component type	Horizontal
ANSI/TIA category	6A
Separator type	Isolator
Separator material	FEP
Insulation material	FEP
Jacket material	PVC
Jacket color	Slate
Diameter over jacket, nominal	7.01 mm | 0.276 in
Jacket thickness	0.457 mm | 0.018 in
Weight	58.038 kg/km | 39 lb/kft
DC resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
DC resistance unbalance, maximum	4 %
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	70 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Operating voltage, maximum	80 V
Safety voltage rating	300 V
LP (Limited Power) rating	0.8 A
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Temperature rating, UL	105 °C | 221 °F
Temperature rating, ETL	105 °C | 221 °F
Pulling tension, maximum	11.34 kg | 25 lb
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in high-performance horizontal LAN installations where ANSI/TIA-568.2-D compliance is required.
• Install in plenum spaces where CMP/FT6 flame and smoke test methods are specified.
• Enable remote powering and comply with IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.