CommScope 760122663 2291B GRN C6A 4/23 F/UTP R1000, Plenum 4 Pair 23 AWG PVC Jacket

SYSTIMAX® 2291B from the GigaSPEED X10D® line is a Category 6A F/UTP (Shielded) twisted pair cable for horizontal LAN installations up to 500 MHz. It features a 4-pair, 23 AWG solid bare copper design with an aluminum/poly foil shield and a solid 26 AWG tinned copper drain wire. For plenum spaces, it uses FEP insulation and a green PVC jacket, and it comes on a 304.8 m | 1000 ft reel.

Key Features

• Category 6A twisted pair cable rated for operation up to 500 MHz.
• F/UTP (Shielded) construction with an aluminum/poly foil shield and a solid 26 AWG tinned copper drain wire.
• 4-pair design with 8 solid 23 AWG bare copper conductors.
• Plenum-rated cable with FEP insulation and a green PVC jacket.
• Supports remote powering and fully complies with IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Product number	2291B
Cable component type	Horizontal
ANSI/TIA category	6A
Transmission standards	ANSI/TIA-568.2-D
Separator type	Isolator
Separator material	FEP
Shield (tape) material	Aluminum/Poly
Cable length	304.8 m | 1000 ft
Packaging type	Reel
Diameter over jacket, nominal	7.01 mm | 0.276 in
Jacket thickness	0.457 mm | 0.018 in
Weight	58.038 kg/km | 39 lb/kft
DC resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
DC resistance unbalance, maximum	4 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	70 %
Operating voltage, maximum	80 V
Safety voltage rating	300 V
LP (Limited Power) rating	0.8 A
Pulling tension, maximum	11.34 kg | 25 lb
Environmental space	Plenum
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Temperature rating, ETL	105 °C | 221 °F
Temperature rating, UL	105 °C | 221 °F
Flame test method	CMP/FT6
Smoke test method	CMP/FT6
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in high-performance horizontal LAN installations requiring operation up to 500 MHz.
• Install in plenum spaces where CMP/FT6 flame and smoke test methods are specified.
• Support remote powering installations that follow IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.