CommScope 760171017 2291B RED C6A 4/23 F/UTP R1000, Plenum 4 Pair 23 AWG PVC

CommScope 760171017 2291B is a SYSTIMAX® GigaSPEED X10D® Category 6A F/UTP (Shielded) twisted pair cable for horizontal LAN installations. It features a 4-pair, 23 AWG solid bare copper design with a red PVC jacket and FEP insulation, supporting operation up to 500 MHz and meeting ANSI/TIA-568.2-D. The cable is plenum-rated and supplied on a reel in 304.8 m | 1000 ft length.

Key Features

• Category 6A twisted pair cable meeting ANSI/TIA-568.2-D transmission standards.
• F/UTP (Shielded) construction with Aluminum/Poly shield tape and a solid 26 AWG drain wire.
• 4 pairs (8 conductors) using 23 AWG solid bare copper conductors.
• Supports operation up to 500 MHz.
• Plenum-rated cable with a red PVC jacket and FEP insulation.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Product number	2291B
Cable component type	Horizontal
Separator type	Isolator
Separator material	FEP
Drain wire material	Tinned Copper
Cable length	304.8 m | 1000 ft
Packaging type	Reel
Diameter over jacket, nominal	7.01 mm | 0.276 in
Jacket thickness	0.457 mm | 0.018 in
Weight	58.038 kg/km | 39 lb/kft
Operating voltage, maximum	80 V
Safety voltage rating	300 V
LP (Limited Power) rating	0.8 A
Nominal velocity of propagation (NVP)	70 %
DC resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
DC resistance unbalance, maximum	4 %
Mutual capacitance at frequency	5.6 nF/100 m @ 1 kHz
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Temperature rating, UL	105 °C | 221 °F
Temperature rating, ETL	105 °C | 221 °F
Flame test method	CMP/FT6
Smoke test method	CMP/FT6
Pulling tension, maximum	11.34 kg | 25 lb

Applications

• Use in high-performance horizontal LAN installations.
• Install in plenum spaces.
• Enable safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.