CommScope 760172940 1091B PRP C6A 4/23 U/UTP W1000, Riser 4 Pair 23 AWG Violet

SYSTIMAX® 1091B from the GigaSPEED X10D® line is a Category 6A U/UTP (Unshielded) twisted pair data cable for horizontal cabling in non-plenum spaces. It uses solid 23 AWG Bare Copper conductors with a PVC jacket and includes a 4-pair isolator separator. The cable supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA performance up to 550 MHz, and is supplied as a 304.8 m | 1000 ft pull in a WE TOTE® box.

Key Features

• Category 6A U/UTP (Unshielded) twisted pair cable for data installations.
• Horizontal cable component type for structured cabling layouts.
• Solid 23 AWG Bare Copper conductors with 4 pairs (8 conductors) and an isolator separator.
• Supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA up to 550 MHz.
• Non-plenum environmental space with CMR flame test method.
• Packaged in a WE TOTE® box with a 304.8 m | 1000 ft cable length.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted Pair Cable
Type	Data
Product number	1091B
ANSI/TIA category	6A
Insulation material	Polyolefin
Separator type	Isolator
Separator material	Polyolefin
Separator 2 material	Polyolefin
Jacket material	PVC
Jacket color	Black
Diameter over insulated conductor	0.864 mm | 0.034 in
Diameter over jacket, nominal	7.239 mm | 0.285 in
Jacket thickness	1.295 mm | 0.051 in
Characteristic impedance	100 ohm
Impedance tolerance	±15 ohm
DC resistance, maximum	7.61 ohms/100 m | 2.32 ohms/100 ft
DC resistance unbalance, maximum	4 %
Mutual capacitance	6.0 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	65 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Operating voltage, maximum	80 V
LP (Limited Power) rating	0.5 A
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Temperature rating, UL	90 °C | 194 °F
Weight	55.508 kg/km | 37.3 lb/kft
Remote powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A

Applications

• Used for horizontal data cabling installations in non-plenum riser spaces.
• Meets structured cabling requirements that follow ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA.
• Supports LAN deployments where IEEE 802.3bt (Type 4) remote powering recommendations are followed per ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2, or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.