CommScope 760178129 1592A BLK C6A 4/23 F/UTP R1000, 23 3 CAT6A F UTP Cable Black R1000

SYSTIMAX® 1592A is a Category 6A F/UTP (shielded) twisted pair cable built with 23 AWG solid bare copper conductors in a 4-pair (8-conductor) construction. It supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA transmission standards up to 500 MHz. The black PE jacket is UV resistant for outdoor and/or direct burial installations, and the cable ships on a 304.8 m | 1000 ft reel. Remote powering fully complies with IEEE 802.3bt (Type 4) when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Key Features

• Category 6A F/UTP (shielded) twisted pair cable for horizontal cabling runs.
• 23 AWG solid bare copper conductors in a 4-pair (8-conductor) construction.
• Supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA transmission standards up to 500 MHz.
• Black PE jacket is UV resistant for outdoor and/or direct burial installations.
• Remote powering fully complies with IEEE 802.3bt (Type 4) when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	SYSTIMAX®
Product type	Twisted pair cable
Product number	1592A
Cable component type	Horizontal
Pairs	4
Conductors	8
Conductor type	Solid
Separator type	Isolator
Jacket color	Black
NVP	62 %
Delay note	Delay has been derated by 6% due to the water proofing agents | The maximum permanent link length is reduced from 295 feet to 277 feet as a result of the delay derating
DC resistance (max)	9.38 ohms/100 m | 2.859 ohms/100 ft
DC resistance unbalance (max)	5 %
Mutual capacitance	6.0 nF/100 m @ 1 kHz
Dielectric strength (min)	1500 Vac | 2500 Vdc
Operating voltage (max)	80 V
Safety voltage rating	300 V
Cable length	304.8 m | 1000 ft
Diameter over jacket (nominal)	8.382 mm | 0.33 in
Diameter over inner jacket	6.502 mm | 0.256 in
Jacket thickness	0.686 mm | 0.027 in
Inner jacket thickness	0.457 mm | 0.018 in
Diameter over insulated conductor	1.125 mm | 0.0443 in
Conductor material	Bare Copper
Drain wire material	Tinned Copper
Insulation material	Polyolefin
Jacket material	PE
Separator material	Polyolefin
Shield (tape) material	Aluminum/Poly
Pulling tension (max)	11.34 kg | 25 lb
Installation temperature	-30 °C to +70 °C (-22 °F to +158 °F)
Operating temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Environmental space	Buried
Environmental note	UV resistant for outdoor and/or direct burial installations
Packaging type	Reel
Weight	64.735 kg/km | 43.5 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Provides reliable, clear data connections in horizontal cabling runs.
• Works for outdoor and/or direct burial installations where UV resistance is required.
• Enables remote powering per IEEE 802.3bt (Type 4) when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.