CommScope 760185900 2091B BLK C6A 4/23 U/UTP W1000, Plenum 4 Pair 23 AWG PVC Jacket

CommScope 760185900 2091B is a SYSTIMAX® GigaSPEED X10D® Category 6A U/UTP (unshielded) twisted pair cable with 23 AWG solid bare copper conductors and a black PVC jacket. Designed for horizontal LAN installations, it supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA with an operating frequency up to 550 MHz. This plenum cable uses FEP insulation and is supplied in a 304.8 m | 1000 ft WE TOTE® box.

Key Features

• Category 6A twisted pair cable for high-performance horizontal LAN installations.
• U/UTP (unshielded) construction with 4 pairs (8 conductors) of 23 AWG solid bare copper.
• Supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA transmission standards up to 550 MHz.
• Plenum environmental space design with FEP insulation and a black PVC jacket.
• Remote powering: fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Packaged in a 304.8 m | 1000 ft WE TOTE® box.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Product number	2091B
Cable component type	Horizontal
Separator type	Isolator
Separator material	FEP
Separator 2 material	Polyolefin
Diameter over insulated conductor	0.889 mm | 0.035 in
Diameter over jacket, nominal	7.239 mm | 0.285 in
Jacket thickness	1.295 mm | 0.051 in
DC resistance, maximum	7.61 ohms/100 m | 2.32 ohms/100 ft
DC resistance unbalance, maximum	4 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Mutual capacitance at frequency	6.0 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	66 %
Operating voltage, maximum	80 V
LP (Limited Power) rating	0.6 A
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +75 °C (-4 °F to +167 °F)
Temperature rating, ETL	105 °C | 221 °F
Temperature rating, UL	105 °C | 221 °F
Flame test method	CMP/FT6
Smoke test method	CMP/FT6 | NFPA 262
Safety standard	UL 444
Weight	60.568 kg/km | 40.7 lb/kft
Note	Consult ANSI/TIA-568-C.2 Annex G for length de-rating guidance for Cable installation in higher temperature environments

Applications

• Use in horizontal LAN installations where Category 6A performance is required.
• Install in plenum spaces where CMP/FT6 and NFPA 262 smoke test methods are specified.
• Deploy in systems built to ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA transmission standards.
• Support IEEE 802.3bt (Type 4) remote powering when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.