CommScope 760237778 UNJ600-BL, Cat 6 UTP RJ45 Jack Blue

CommScope Uniprise® UNJ Series modular jack is a Category 6 solution for unshielded LAN cabling, designed for installation in M Series faceplates and panels. It supports T568A and T568B wiring with IDC termination using a 110 Punchdown tool or JTT Termination tool for consistent installs. The jack fully supports IEEE 802.3bt (Type 4) remote powering and complies with IEC 60512-99-002 unmating under electrical load requirements. It is built with gold-plated beryllium copper contacts and a UL 94 V-0 rated housing for dependable connectivity.

Key Features

• Category 6 performance for unshielded LAN cabling.
• Supports T568A and T568B wiring for flexible termination schemes.
• IDC termination compatible with a 110 Punchdown tool or JTT Termination tool.
• Fully supports IEEE 802.3bt (Type 4) remote powering and complies with IEC 60512-99-002 unmating under electrical load requirements.
• Supports IEEE 802.3bt Type 4 (90 W) applications greater than 3000 plug to jack mating cycles.
• Gold-plated beryllium copper contacts with 1.27 μm contact plating thickness.
• UL 94 V-0 flammability rating and UL safety standard.

Technical Specs

Manufacturer	Uniprise®
Product type	Modular jack
Product series	UNJ Series
Transmission standards	ANSI/TIA-568.2-D | ISO/IEC 11801 Class E
Mounting	M Series faceplates and panels
Termination type	IDC
Termination punchdowns, minimum	20 times
Integrated dust cover type	None
Conductor type	Solid | Stranded
Compatible conductor gauge, solid	22–24 AWG
Compatible conductor gauge, stranded	24–26 AWG
Compatible cable diameter, maximum	5.8 mm | 0.228 in
Compatible insulated conductor diameter, maximum	1.45 mm | 0.057 in
Height	18.8 mm | 0.74 in
Width	18.5 mm | 0.728 in
Depth	30.5 mm | 1.201 in
Contact resistance, maximum	20 mOhm
Current rating at temperature	1.5 A @ 20 °C | 1.5 A @ 68 °F
Dielectric withstand voltage, RMS, contact-to-contact	1,000 Vac @ 60 Hz
Insulation resistance, minimum	500 MOhm
Safety voltage rating	150 Vac
Material type	PC+ABS
IDC termination material	Phosphor Bronze
Termination contact plating	Tin
Plug retention force, minimum	50 N | 11.24 lbf
Plug to jack mating cycles	Complies to IEC 60603-7 series
Operating temperature	-10 °C to +60 °C (+14 °F to +140 °F)
Storage temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Relative humidity	Up to 95%, non-condensing
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant
Packaging quantity	1
Packaging type	Bag

Applications

• Installs into M Series faceplates and panels to terminate and present network connections at the wall, desk, or patching location.
• Enables remote powering deployments described by IEEE 802.3bt (Type 4) where compliance with IEC 60512-99-002 unmating under electrical load requirements is needed.
• Meets installations that require compatibility with both solid and stranded conductors within the listed gauge and diameter ranges.
• Works in environments within the specified operating temperature, storage temperature, and relative humidity limits.

CommScope™ and all associated trademarks are the property of their respective owners.