CommScope 760237783 UNJ600-YL, Cat 6 UTP RJ45 Modular Jack Yellow

CommScope Uniprise® UNJ600-YL is a Category 6 unshielded modular jack for RJ45 terminations in structured cabling systems. It supports solid and stranded conductors and mounts into M Series faceplates and panels for clean installations. Performance is specified to ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E, and it supports remote powering per IEEE 802.3bt (Type 4). Note: This part has been discontinued by the supplier; use # 969630-NEW as the suggested replacement.

Key Features

• Category 6 unshielded modular jack for RJ45 terminations.
• Supports solid and stranded conductors.
• Wiring options: T568A | T568B.
• Transmission standards: ANSI/TIA-568-C.2 | ISO/IEC 11801 Class E.
• Remote powering: supports the safe delivery of power over LAN cabling described by IEEE 802.3bt (Type 4) and complies with the unmating under electrical load requirements prescribed by IEC 60512-99-002.

Technical Specs

Manufacturer	Uniprise®
Product type	Modular jack
Product series	UNJ Series
ANSI/TIA Category	6
Cable type	Unshielded
Mounting	M Series faceplates and panels
Color	Yellow
Termination type	IDC
Termination tool	JTT Termination tool
Termination punchdowns, minimum	20 times
Compatible conductor gauge, solid	24–22 AWG
Compatible conductor gauge, stranded	24–26 AWG
Compatible cable diameter, maximum	5.8 mm | 0.228 in
Compatible insulated conductor diameter, maximum	1.45 mm | 0.057 in
Height	18.8 mm | 0.74 in
Width	18.5 mm | 0.728 in
Depth	30.5 mm | 1.201 in
Contact resistance, maximum	100 mOhm
Current rating at temperature	1.5 A @ 20 °C | 1.5 A @ 68 °F
Dielectric withstand voltage, RMS, contact-to-contact	1,000 Vac @ 60 Hz
Insulation resistance, minimum	500 MOhm
Safety voltage rating	150 Vac
PoE durability	Supports IEEE 802.3bt Type 4 (90 W) applications greater than 3000 plug to jack mating cycles
Material type	PC+ABS
Contact base material	Beryllium copper
Contact plating material	Gold
Contact plating thickness	1.27 μm
IDC termination material	Phosphor Bronze
Termination contact plating	Tin
Plug retention force, minimum	50 N | 11.24 lbf
Plug to jack mating cycles	Complies to IEC 60603-7 series
Integrated dust cover type	None
Operating temperature	-10 °C to +60 °C (+14 °F to +140 °F)
Storage temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Relative humidity	Up to 95%, non-condensing
Flammability rating	UL 94 V-0
Safety standard	UL
Packaging quantity	1
Packaging type	Bag
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use it for RJ45 terminations in structured cabling systems that require consistent, standards-based connectivity.
• Install it into M Series faceplates and panels for clean, professional wallplate and patch panel builds.
• Choose it for deployments that require remote powering support per IEEE 802.3bt (Type 4).

CommScope™ and all associated trademarks are the property of their respective owners.