CommScope 760246209 1091SD YEL C6A 4/23 U/UTP R1000, 4 Pair 23 AWG PVC Yellow

SYSTIMAX® 1091SD from the GigaSPEED X10D® line is a Category 6A U/UTP horizontal twisted pair cable built with 4 pairs (8 solid 23 AWG bare copper conductors) and a yellow PVC jacket. It is designed for data networks up to 500 MHz and supports remote powering with full compliance to IEEE 802.3bt (Type 4) recommendations when installed according to the specified standards. This cable is supplied on a reel in a 304.8 m | 1000 ft length for non-plenum applications.

Key Features

• Category 6A performance with a maximum operating frequency of 500 MHz.
• U/UTP (unshielded) horizontal twisted pair construction with 4 pairs and 8 solid 23 AWG bare copper conductors.
• Yellow PVC jacket with polyolefin insulation and an isolator separator.
• Remote powering support that fully complies with IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2, or TIA TSB-184-A.
• Reel packaging with a 304.8 m | 1000 ft cable length for efficient pulls.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Product number	1091SD
Cable component type	Horizontal
Application type	Data
ANSI/TIA category	6A
Transmission standards	ANSI/TIA-568.2-D
Separator type	Isolator
Separator material	Polyolefin
Tape material	Poly/Aluminum/Poly
Diameter over insulated conductor	1.148 mm | 0.0452 in
Diameter over jacket, nominal	6.731 mm | 0.265 in
Jacket thickness	0.406 mm | 0.016 in
Operating voltage, maximum	80 V
LP (Limited Power) rating	0.5 A
DC resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
DC resistance unbalance, maximum	4 %
Mutual capacitance at frequency	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	70 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Pulling tension, maximum	11.34 kg | 25 lb
Environmental space	Non-Plenum
Flame test method	CMR
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +75 °C (-4 °F to +167 °F)
Temperature rating, UL	75 °C | 167 °F
Weight	40.18 kg/km | 27 lb/kft
Note	Consult ANSI/TIA-568-C.2 Annex G for length de-rating guidance for cable installation in higher temperature environments

Applications

• Use in high-performance data networks requiring operation up to 500 MHz.
• Enable LAN connectivity and remote powering when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2, or TIA TSB-184-A.
• Install in non-plenum environments where a CMR flame test method rating is specified.

CommScope™ and all associated trademarks are the property of their respective owners.