CommScope 760253621 2091SDB BLU C6A 4/23 U/UTP R1000, CAT6A 4P 23AWG Solid U UTP BLU

CommScope SYSTIMAX® 2091SDB GigaSPEED X10D® is a Category 6A U/UTP (Unshielded) twisted pair cable for horizontal LAN installations in plenum spaces. It is built with 4 pairs (8 Conductors) of 23 AWG Solid Bare Copper and a Blue PVC jacket. The cable supports transmission to 500 MHz and complies with ANSI/TIA-568.2-D.

Key Features

• Category 6A U/UTP (Unshielded) twisted pair cable for horizontal installations.
• 4 pairs (8 Conductors) with 23 AWG Solid Bare Copper conductors.
• Blue PVC jacket with an Isolator separator type.
• Supports operating frequency up to 500 MHz.
• Complies with ANSI/TIA-568.2-D.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Consult ANSI/TIA-568-C.2 Annex G for length de-rating guidance for Cable installation in higher temperature environments.

Technical Specs

Manufacturer	SYSTIMAX®
Product brand	GigaSPEED X10D®
Product type	Twisted pair cable
Product number	2091SDB
Cable length	304.8 m | 1000 ft
Diameter over insulated conductor	1.115 mm | 0.0439 in
Diameter over jacket, nominal	6.325 mm | 0.249 in
Jacket thickness	0.406 mm | 0.016 in
Operating voltage, maximum	80 V
DC resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
DC resistance unbalance, maximum	4 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Mutual capacitance at frequency	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	70 %
LP (Limited Power) rating	0.7 A
Conductor material	Bare Copper
Insulation material	FEP
Separator material	FEP
Tape material	Poly/Aluminum/Poly
Pulling tension, maximum	11.34 kg | 25 lb
Environmental space	Plenum
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +75 °C (-4 °F to +167 °F)
Temperature rating, UL	105 °C | 221 °F
Flame test method	CMP/FT6
Smoke test method	CMP/FT6
Packaging type	Reel
Weight	58.038 kg/km | 39 lb/kft

Applications

• Use in horizontal LAN installations in plenum spaces.
• Support deployments that follow ANSI/TIA-568.2-D transmission standards.
• Meet IEEE 802.3bt (Type 4) remote powering requirements when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.