CommScope 874027314/10 CS24P WHT C5E 4/24 U/UTP CPK 1KFT, Category 5E UTP Cable 4 Pair CMP Pull Box

CommScope® CS24P is a Category 5e U/UTP (Unshielded) twisted pair horizontal cable for plenum spaces, rated for performance up to 200 MHz. It is built with 4 pairs (8 solid 24 AWG bare copper conductors) and a white PVC jacket. Supplied as 304.8 m | 1000 ft in a CommPak® box, it is designed for reliable LAN installations and supports remote powering per IEEE 802.3bt (Type 4) recommendations when installed to the listed standards.

Key Features

• Category 5e twisted pair horizontal cable with U/UTP (Unshielded) construction for LAN cabling.
• 4 pairs (8 solid 24 AWG bare copper conductors) for consistent conductor construction.
• Plenum environmental space rating with CMP/FT6 flame and smoke test methods listed.
• Rated up to 200 MHz with 100 ohm characteristic impedance.
• White PVC jacket for clean, professional installations.
• 304.8 m | 1000 ft length packaged in a CommPak® box for jobsite handling.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	CommScope®
Product number	CS24P
Cable component type	Horizontal
Product type	Twisted pair cable
ANSI/TIA category	5e
Environmental space	Plenum
Transmission standards	ANSI/TIA-568.2-D | CENELEC EN 50288-3-1 | ISO/IEC 11801 Class D
Electrical test note	All electrical transmission tests include swept frequency measurements
Insulation material	FEP | Polyolefin
Cable diameter over jacket, nominal	4.877 mm | 0.192 in
Jacket thickness	0.508 mm | 0.02 in
dc resistance, maximum	9.38 ohms/100 m | 2.859 ohms/100 ft
dc resistance unbalance, maximum	5 %
Delay skew, maximum	15 ns
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	76 %
Operating voltage, maximum	80 V
Safety voltage rating	300 V
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6
Weight	30.373 kg/km | 20.41 lb/kft

Applications

• Use in horizontal LAN cabling installations where Category 5e performance up to 200 MHz is required.
• Install in plenum environmental spaces where the listed CMP/FT6 flame and smoke test methods apply.
• Deploy for remote powering aligned with IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.