CommScope 874029014/10 CS24P YEL C5E 4/24 U/UTP CPK 1KFT, 4 Pair UTP 24 AWG FEP FRPVC Jacket

CommScope® CS24P is a Category 5e U/UTP twisted pair data cable for horizontal LAN installations in plenum spaces. It is built with 4 pairs (8 solid bare copper conductors) in 24 AWG, with FEP | Polyolefin insulation and a yellow PVC jacket. Designed to support performance through 200 MHz, it meets ANSI/TIA-568.2-D and ISO/IEC 11801 Class D transmission standards and complies with IEEE 802.3bt (Type 4) remote powering recommendations when installed per the specified cabling standards.

Key Features

• Category 5e U/UTP (unshielded) twisted pair cable for data networking.
• 4 pairs (8 conductors) using 24 AWG solid bare copper conductors.
• Yellow PVC jacket with FEP | Polyolefin insulation.
• Supports performance through 200 MHz.
• Meets ANSI/TIA-568.2-D and ISO/IEC 11801 Class D transmission standards.
• Complies with IEEE 802.3bt (Type 4) remote powering recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Plenum environmental space rating with CMP/FT6 flame and smoke test method.

Technical Specs

Manufacturer	CommScope®
Product number	CS24P
Product type	Twisted Pair Cable
Cable component type	Horizontal
Type	Data
Transmission standards	ANSI/TIA-568.2-D | CENELEC EN 50288-3-1 | ISO/IEC 11801 Class D
Electrical test note	All electrical transmission tests include swept frequency measurements
Cable length	304.8 m | 1000 ft
Diameter over jacket, nominal	4.877 mm | 0.192 in
Jacket thickness	0.508 mm | 0.02 in
Characteristic impedance	100 ohm
NVP	76 %
dc resistance, maximum	9.38 ohms/100 m | 2.859 ohms/100 ft
dc resistance unbalance, maximum	5 %
Delay skew, maximum	15 ns
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Operating voltage, maximum	80 V
Safety voltage rating	300 V
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6
Packaging type	CommPak® box
Weight	30.373 kg/km | 20.41 lb/kft

Applications

• Use in horizontal LAN installations.
• Suitable for plenum spaces.
• Remote powering support per IEEE 802.3bt (Type 4) when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.