CommScope 874031414/10 CS27P BLU C5E 4/24 U/UTP CPK 1KFT, 24 AWG 4 Pair UTP CMP FEP FRPVC

CommScope® CS27P is a Category 5e U/UTP (Unshielded) twisted pair horizontal cable for Plenum installations. It features 24 AWG solid bare copper conductors in a 4-pair (8-conductor) construction with a blue PVC jacket. The cable supports ANSI/TIA-568.2-D, CENELEC EN 50288-3-1, and ISO/IEC 11801 Class D, and is rated up to 350 MHz. Supplied in a 304.8 m | 1000 ft CommPak® box, it complies with IEEE 802.3bt (Type 4) remote powering recommendations when installed according to the specified cabling standards.

Key Features

• Category 5e U/UTP (Unshielded) twisted pair horizontal cable design.
• 24 AWG solid bare copper conductors in a 4-pair (8-conductor) construction.
• Blue PVC jacket for Plenum environmental space installations.
• Supports ANSI/TIA-568.2-D, CENELEC EN 50288-3-1, and ISO/IEC 11801 Class D transmission standards.
• Operating frequency, maximum: 350 MHz.
• Remote powering: Complies with the recommendations set forth by IEEE 802.3bt (Type 4) when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	CommScope®
Product number	CS27P
Product type	Twisted pair cable
Cable component type	Horizontal
Insulation material	FEP | Polyolefin
Characteristic impedance	100 ohm
Nominal velocity of propagation (NVP)	76 %
dc resistance, maximum	9.38 ohms/100 m | 2.859 ohms/100 ft
dc resistance unbalance, maximum	5 %
Delay skew, maximum	15 ns
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Operating voltage, maximum	80 V
Safety voltage rating	300 V
Cable length	304.8 m | 1000 ft
Diameter over jacket, nominal	4.877 mm | 0.192 in
Jacket thickness	0.508 mm | 0.02 in
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6
Pulling tension, maximum	11.34 kg | 25 lb
Packaging type	CommPak® box
Weight	30.373 kg/km | 20.41 lb/kft
Test note	All electrical transmission tests include swept frequency measurements

Applications

• Use for horizontal cabling runs in Plenum spaces where listed flame and smoke test methods are required.
• Install in systems built to ANSI/TIA-568.2-D, CENELEC EN 50288-3-1, and ISO/IEC 11801 Class D transmission standards.
• Deploy in LAN environments that follow IEEE 802.3bt (Type 4) remote powering recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.