CommScope 874036404/10 CS44P-IO BLK C6A 4/23 U/UTP RL 1KFT, CAT6A Plenum UTP 23 AWG 4P Black

CommScope® CS44P-IO is a Category 6A U/UTP (Unshielded) twisted pair data cable built with solid 23 AWG bare copper conductors in a 4-pair (8-Conductor) construction. It features a black PVDF jacket with FEP insulation and an FEP isolator separator, and is designed for horizontal data cabling. CS44P-IO supports transmission to 500 MHz and meets ANSI/TIA-568.2-D. Supplied on a 304.8 m | 1000 ft reel, it is rated for Indoor/Outdoor | Plenum | Sunlight Resistant use and supports remote powering aligned with IEEE 802.3bt (Type 4) installation recommendations when installed per the listed standards.

Key Features

• Category 6A twisted pair data cable meeting ANSI/TIA-568.2-D with a maximum operating frequency of 500 MHz.
• U/UTP (Unshielded) construction with solid 23 AWG bare copper conductors in a 4-pair (8-Conductor) design.
• Black PVDF jacket with FEP insulation and an FEP isolator separator.
• Environmental space rated Indoor/Outdoor | Plenum | Sunlight Resistant.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	CommScope®
Product type	Twisted Pair Cable
Product number	CS44P-IO
Cable component type	Horizontal
Type	Data
ANSI/TIA category	6A
Cable length	304.8 m | 1000 ft
Packaging type	Reel
Diameter over jacket, nominal	6.858 mm | 0.27 in
Diameter over insulated conductor	1.115 mm | 0.0439 in
Jacket thickness	0.457 mm | 0.018 in
Weight	42.859 kg/km | 28.8 lb/kft
Tape material	Poly/Aluminum/Poly
dc resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
dc resistance unbalance, maximum	4 %
Delay skew, maximum	45 ns
Mutual capacitance at frequency	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	70 %
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Safety voltage rating	300 V
LP (Limited Power) rating	0.7 A
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	-25 °C to +75 °C (-13 °F to +167 °F)
Operating temperature	-40 °C to +75 °C (-40 °F to +167 °F)
Temperature rating, ETL	105 °C | 221 °F
EN50575 CPR Cable EuroClass fire performance	Fca
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6
Oil/Fuel resistance test method	IEC 60811-2-1 (IRM 902 & IRM 903) | SAE J1127 | UL1277 Oil Res II method at 125 °C | UL1277 Oil Resistance I & II
Safety standard	ANSI/ICEA S-100-685
Environmental note	Cable is not suitable for direct burial applications | Cable Jacket must remain unabraded to avoid water ingress | This Cable is intended for installation in below-grade conduit, duct and wet environments | Water must not be allowed to ingress into the Cable ends
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Designed for horizontal data cabling installations in plenum spaces.
• Remote powering installations can follow IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Suitable for Indoor/Outdoor environments where Sunlight Resistant cabling is required.
• Intended for installation in below-grade conduit, duct and wet environments, with cable ends protected to prevent water ingress.

CommScope™ and all associated trademarks are the property of their respective owners.