CommScope 874036514/10 CS27P YEL C5E 4/24 U/UTP CPK 1KFT, Cat 5E CMP 24 4P UTP Yellow

CommScope® CS27P is a Category 5e U/UTP (Unshielded) twisted pair cable for horizontal LAN installations in Plenum spaces. It is built with 4 pairs (8 Solid 24 AWG Bare Copper Conductors) and a Yellow PVC Jacket for easy identification in pathways. Designed to meet ANSI/TIA-568.2-D and ISO/IEC 11801 Class D performance requirements, it supports operating frequencies up to 350 MHz with 100 ohm characteristic impedance. The cable is supplied in a 304.8 m | 1000 ft CommPak® box.

Key Features

• Category 5e U/UTP (Unshielded) twisted pair cable for horizontal installations.
• 4 pairs (8 Solid 24 AWG Bare Copper Conductors) for structured cabling runs.
• Yellow PVC Jacket helps with visual identification in pathways.
• Meets ANSI/TIA-568.2-D and ISO/IEC 11801 Class D performance requirements.
• Supports operating frequencies up to 350 MHz with 100 ohm characteristic impedance.
• Remote powering support: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	CommScope®
Product number	CS27P
Product type	Twisted pair cable
Cable component type	Horizontal
ANSI/TIA category	5e
Transmission standards	ANSI/TIA-568.2-D | CENELEC EN 50288-3-1 | ISO/IEC 11801 Class D
Electrical test note	All electrical transmission tests include swept frequency measurements
Insulation material	FEP | Polyolefin
Cable length	304.8 m | 1000 ft
Diameter over jacket, nominal	4.877 mm | 0.192 in
Jacket thickness	0.508 mm | 0.02 in
Nominal velocity of propagation (NVP)	76 %
DC resistance, maximum	9.38 ohms/100 m | 2.859 ohms/100 ft
DC resistance unbalance, maximum	5 %
Delay skew, maximum	15 ns
Mutual capacitance at frequency	5.6 nF/100 m @ 1 kHz
Operating voltage, maximum	80 V
Safety voltage rating	300 V
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Environmental space	Plenum
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6
Pulling tension, maximum	11.34 kg | 25 lb
Weight	30.373 kg/km | 20.41 lb/kft
Packaging type	CommPak® box

Applications

• Intended for horizontal LAN installations in Plenum spaces.
• Use where compliance with ANSI/TIA-568.2-D, ISO/IEC 11801 Class D, and CENELEC EN 50288-3-1 is required.
• Supports remote powering deployments when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.