CommScope 874049304/10 CS34P-IO BLK C6 4/23 U/UTP RL 1KFT, Cat 6 CMP 23 AWG 4P Black

CommScope® CS34P-IO is a Category 6 U/UTP (Unshielded) horizontal twisted pair cable for data installations, specified up to 250 MHz. It is built with 23 AWG solid bare copper conductors in 4 pairs (8 conductors total) and meets ANSI/TIA-568.2-D transmission standards. The cable features a black PVDF jacket with CMP | CMX fire safety listing and is identified for Indoor/Outdoor | Plenum | Sunlight Resistant environments. Supplied on a reel in a 304.8 m | 1000 ft length, it also complies with IEEE 802.3bt (Type 4) remote powering recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Key Features

• Category 6 U/UTP (Unshielded) horizontal twisted pair construction for data cabling.
• 23 AWG solid bare copper conductors in 4 pairs (8 conductors total).
• Rated up to 250 MHz and specified to ANSI/TIA-568.2-D transmission standards.
• Black PVDF jacket with CMP | CMX fire safety listing.
• Environmental space listed as Indoor/Outdoor | Plenum | Sunlight Resistant.
• Packaged on a reel in a 304.8 m | 1000 ft length.

Technical Specs

Manufacturer	CommScope®
Product number	CS34P-IO
Product type	Twisted Pair Cable
Cable component type	Horizontal
Type	Data
Separator type	Isolator
Insulation material	FEP
Separator material	FEP
Tape material	Poly/Aluminum/Poly
Diameter over jacket, nominal	6.756 mm | 0.266 in
Jacket thickness	0.457 mm | 0.018 in
Diameter over insulated conductor	1.115 mm | 0.0439 in
Nominal velocity of propagation (NVP)	70 %
dc resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
dc resistance unbalance, maximum	4 %
Delay skew, maximum	45 ns
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Safety voltage rating	300 V
Installation temperature	-25 °C to +75 °C (-13 °F to +167 °F)
Operating temperature	-40 °C to +75 °C (-40 °F to +167 °F)
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6 | NFPA 262
Safety standard	UL 444
EN50575 CPR Cable EuroClass fire performance	No Rating
Environmental note	Cable is not suitable for direct burial applications | Cable Jacket must remain unabraded to avoid water ingress | This Cable is intended for installation in below-grade conduit, duct and wet environments | Water must not be allowed to ingress into the Cable ends
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant
Pulling tension, maximum	11.34 kg | 25 lb
Weight	42.859 kg/km | 28.8 lb/kft
Packaging type	Reel

Applications

• Use for high-performance LAN installations up to 250 MHz.
• Install in Indoor/Outdoor | Plenum | Sunlight Resistant environments where CMP | CMX fire safety listing is required.
• Deploy in below-grade conduit, duct and wet environments, ensuring water is not allowed to ingress into the cable ends.
• Support remote powering per IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.