CommScope 884033104/10 CS24R WHT C5E 4/24 F/UTP RL 1KFT, Copper Category 5e F/UTP 4 Pair White Jacket

CommScope® CS24R is a Category 5e F/UTP (Shielded) twisted pair cable for horizontal LAN installations in non-plenum spaces. It features 24 AWG solid bare copper conductors, an overall foil shield, and a solid drain wire. CS24R supports performance up to 100 MHz and meets ANSI/TIA-568.2-D and ISO/IEC 11801 Class D requirements. The white PVC jacket strips cleanly and resists kinking, and the cable is supplied on a 304.8 m | 1000 ft reel with 1,000 to 0 footage markers every two feet.

Key Features

• Category 5e F/UTP (Shielded) twisted pair cable for horizontal LAN installations in non-plenum spaces.
• 24 AWG solid bare copper conductors with 4 pairs (8 conductors) for structured cabling runs.
• Overall foil shield (Aluminum/Polyester) with a solid 26 AWG tinned copper drain wire.
• Rated for operation up to 100 MHz.
• White PVC jacket designed to strip cleanly and resist kinking.
• Coextruded color striped pairs to simplify identification during termination.
• Supplied on a reel with 1,000 to 0 footage markers every two feet.

Technical Specs

Manufacturer	CommScope®
Product type	Twisted Pair Cable
Product number	CS24R
Cable component type	Horizontal
Cable length	304.8 m | 1000 ft
Diameter over jacket, nominal	6.147 mm | 0.242 in
Jacket thickness	0.508 mm | 0.02 in
Conductor type	Solid
Insulation material	Polyolefin
Characteristic impedance	100 ohm
DC resistance, maximum	9.38 ohms/100 m | 2.859 ohms/100 ft
DC resistance unbalance, maximum	5 %
Delay skew, maximum	15 ns
Mutual capacitance at frequency	5.6 nF/100 m @ 1 kHz
Nominal velocity of propagation (NVP)	69 %
Operating voltage, maximum	80 V
Safety voltage rating	300 V
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Electrical test note	All electrical transmission tests include swept frequency measurements
Transmission standards	ANSI/TIA-568.2-D | CENELEC EN 50288-3-1 | ISO/IEC 11801 Class D
Remote powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Flame test method	CMR | NEC Article 800 | UL 1666 | UL 444
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Packaging type	Reel
Weight	40.18 kg/km | 27 lb/kft
Test report	Available online at www.commscopewebtrak.com

Applications

• Use in horizontal LAN installations in non-plenum spaces.
• Meet ANSI/TIA-568.2-D and ISO/IEC 11801 Class D requirements.
• Deploy IEEE 802.3bt (Type 4) remote powering when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.