CommScope UC1AAA2-0CF006, Cat6A 10GIG T568B 6FT Gray

Uniprise® UC1AAA2-0CF006 is an Ultra 10® UC Series Category 6A twisted pair patch cord for standards-based Ethernet structured cabling. It features U/UTP (Unshielded) construction with solid 24 AWG bare copper conductors and RJ45 plug terminations on both ends, wired to T568B. This patch cord supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA performance requirements and fully supports IEEE 802.3bt (Type 4) remote powering. It is rated for applications greater than 3000 plug to jack mating cycles.

Key Features

• Delivers Category 6A performance for high-performance Ethernet links and structured cabling.
• Uses U/UTP (Unshielded) twisted pair construction with solid 24 AWG bare copper conductors.
• Provides RJ45 plug to RJ45 plug terminations with standard interface features, wired to T568B.
• Supports transmission standards: ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA.
• Fully supports IEEE 802.3bt (Type 4) remote powering and complies with the unmating under electrical load requirements prescribed by IEC 60512-99-002.
• Supports IEEE 802.3bt Type 4 (90 W) applications greater than 3000 plug to jack mating cycles.

Technical Specs

Manufacturer	Uniprise®
Product brand	Ultra 10®
Product series	UC
Product type	Twisted pair patch cord
ANSI/TIA category	6A
Pairs	4
Diameter over jacket	7.24 mm | 0.285 in
Cable assembly length range (ft)	1 – 100
Cable assembly length range (m)	1 – 30
Cable assembly length range (in)	6 – 999
Cable assembly length range (cm)	15 – 999
Current rating at temperature	1.5 A @ 20 °C | 1.5 A @ 68 °F
Safety voltage rating	300 V
Contact resistance (max)	20 mOhm
DC resistance (max)	0.3 ohm
Insulation resistance (min)	500 MOhm
Dielectric withstand voltage, RMS (contact-to-contact)	1,000 Vac @ 60 Hz
Conductor material	Bare Copper
Plug contact material	Phosphor Bronze
Contact plating material	Gold over nickel
Plug housing material	Polycarbonate clear
Jacket material	Polyvinyl Chloride
Environmental space	Non-Plenum
Operating temperature	-10 °C to +60 °C (+14 °F to +140 °F)
Storage temperature	-40 °C to +70 °C (-40 °F to +158 °F)
Flammability rating	UL 94 V-0
Safety standard	ETL | cETL | Anatel
Plug retention force (min)	50 N | 11.24 lbf
Plug to jack mating cycles	Complies to IEC 60603-7 series
Jacket color	Black | Blue | Green | Orange | Red | Slate/Gray | White | Yellow | Purple/Violet
Packaging quantity	1

Applications

• Supports standards-based structured cabling installations that require ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA performance.
• Connects network equipment and patching hardware using RJ45 plug interfaces wired to T568B.
• Enables IEEE 802.3bt (Type 4) remote powering over LAN cabling, including unmating under electrical load requirements prescribed by IEC 60512-99-002.
• Works in Non-Plenum environments where the listed operating and storage temperature ranges apply.

CommScope™ and all associated trademarks are the property of their respective owners.