CommScope UN874043904/10 CS34P BLU C6 4/23 F/UTP RL 1KFT, Category 6 F UTP Plenum Blue Jacket 4C

CommScope Uniprise® CS34P is a Category 6 F/UTP (Shielded) twisted pair cable for horizontal LAN installations in plenum spaces. It features 4 pairs (8 Solid Bare Copper Conductors), an Aluminum/Polyester foil shield, and a Solid 26 AWG Tinned Copper drain wire. Rated to 250 MHz with 100 ohm impedance and 71 % NVP, it is supplied on a reel in a 304.8 m | 1000 ft length with a blue PVC jacket.

Key Features

• Category 6 F/UTP (Shielded) twisted pair cable for horizontal installations in plenum spaces.
• Includes 4 pairs (8 Solid Bare Copper Conductors), an Aluminum/Polyester foil shield, and a Solid 26 AWG Tinned Copper drain wire.
• Electrical performance is rated to 250 MHz with 100 ohm impedance and 71 % NVP.
• Supplied on a reel in a 304.8 m | 1000 ft length with a blue PVC jacket.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

Technical Specs

Manufacturer	Uniprise®
Product type	Twisted pair cable
Product number	CS34P
ANSI/TIA category	6
Cable component type	Horizontal
Environmental space	Plenum
Transmission standards	ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | ISO/IEC 11801 Class E
Test note	All electrical transmission tests include swept frequency measurements
Conductor gauge, singles	23 AWG
Insulation material	FEP
Separator type	Isolator
Separator material	FEP
dc resistance, maximum	8 ohms/100 m | 2.438 ohms/100 ft
dc resistance unbalance, maximum	5 %
Delay skew, maximum	45 ns
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Operating voltage, maximum	80 V
Safety voltage rating	300 V
Dielectric strength, minimum	1500 Vac | 2500 Vdc
Diameter over insulated conductor	1.08 mm | 0.0425 in
Diameter over jacket, nominal	6.934 mm | 0.273 in
Jacket thickness	0.457 mm | 0.018 in
Pulling tension, maximum	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6
Packaging type	Reel
Weight	56.848 kg/km | 38.2 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Used for horizontal LAN installations in plenum spaces.
• Supports high-speed data transmission in commercial network runs.
• Meets installations that follow ANSI/TIA-568.2-D, CENELEC EN 50288-6-1, or ISO/IEC 11801 Class E transmission standards.
• Supports remote powering deployments aligned with IEEE 802.3bt (Type 4) when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.