CommScope UN874049914/10 CS34P BLU C6 4/23 U/UTP CPK 1KFT, Category 6 U UTP Plenum Blue CommPak

CommScope Uniprise® CS34P is a Category 6 U/UTP (Unshielded) twisted pair horizontal data cable for high-performance LAN installations in Plenum spaces. It features 23 AWG solid bare copper conductors in a 4-pair (8-conductor) construction, with a blue PVC jacket and a tape separator. CS34P supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class E, with an operating frequency (maximum) of 250 MHz. It is supplied in a 304.8 m | 1000 ft CommPak® box.

Key Features

• Category 6 U/UTP (Unshielded) twisted pair horizontal data cable.
• 23 AWG solid bare copper conductors in a 4-pair (8-conductor) construction.
• Blue PVC jacket with a tape separator for pair management.
• Supports transmission standards: ANSI/TIA-568.2-D | CENELEC EN 50288-6-1 | ISO/IEC 11801 Class E.
• Operating frequency (maximum): 250 MHz.
• Environmental space: Plenum.
• Remote powering: Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.
• Packaging type: CommPak® box; Cable length: 304.8 m | 1000 ft.

Technical Specs

Manufacturer	Uniprise®
Product number	CS34P
Product type	Twisted pair cable
Cable component type	Horizontal
Type	Data
Characteristic impedance	100 ohm
Nominal velocity of propagation (NVP)	75 %
Delay skew (maximum)	45 ns
DC resistance (maximum)	8 ohms/100 m | 2.438 ohms/100 ft
DC resistance unbalance (maximum)	5 %
Mutual capacitance	5.6 nF/100 m @ 1 kHz
Operating voltage (maximum)	80 V
Safety voltage rating	300 V
Dielectric strength (minimum)	1500 Vac | 2500 Vdc
Electrical test note	All electrical transmission tests include swept frequency measurements
Insulation material	FEP | Polyolefin
Separator material	FEP
Diameter over insulated conductor	0.978 mm | 0.0385 in
Diameter over jacket, nominal	5.461 mm | 0.215 in
Jacket thickness	0.533 mm | 0.021 in
Pulling tension (maximum)	11.34 kg | 25 lb
Installation temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Flame test method	CMP/FT6 | NEC Article 800 | NFPA 262 | UL 444 | UL 910
Smoke test method	CMP/FT6
Weight	38.395 kg/km | 25.8 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use in high-performance LAN installations in Plenum spaces.
• Meet structured cabling requirements for ANSI/TIA-568.2-D and ISO/IEC 11801 Class E deployments.
• Support installations that follow ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2, or TIA TSB-184-A for IEEE 802.3bt (Type 4) remote powering recommendations.

CommScope™ and all associated trademarks are the property of their respective owners.