CommScope UN884031714/10 CS44R YEL C6A 4/23 U/UTP CPK 1KFT, Category 6A U UTP 4 Pair Yellow Jacket

CommScope Uniprise® CS44R is a Category 6A U/UTP (unshielded) twisted pair horizontal cable with solid 23 AWG bare copper conductors in a 4-pair (8-Conductor) design. It is rated for data network performance up to 500 MHz and supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA transmission requirements. The yellow PVC jacket and bisector separator help maintain pair geometry for consistent electrical performance. Supplied as 304.8 m | 1000 ft in a CommPak® box, it is intended for non-plenum installations.

Key Features

• This Category 6A U/UTP (unshielded) twisted pair horizontal cable is designed for structured cabling runs.
• It uses solid 23 AWG bare copper conductors in a 4-pair (8-Conductor) construction.
• It supports ANSI/TIA-568.2-D and ISO/IEC 11801 Class EA transmission requirements.
• Operating frequency, maximum: 500 MHz.
• A yellow PVC jacket with a bisector separator helps maintain pair geometry.
• Environmental space: non-plenum.

Technical Specs

Manufacturer	Uniprise®
Product Type	Twisted Pair Cable
Product Number	CS44R
Cable Component Type	Horizontal
ANSI/TIA Category	6A
Transmission Standards	ANSI/TIA-568.2-D | ISO/IEC 11801 Class EA
Remote Powering	Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN Cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Insulation Material	Polyolefin
Separator Material	Polyolefin
Cable Length	304.8 m | 1000 ft
Diameter Over Jacket, nominal	7.239 mm | 0.285 in
Jacket Thickness	1.295 mm | 0.051 in
Diameter Over Insulated Conductor	0.864 mm | 0.034 in
dc Resistance, maximum	7.61 ohms/100 m | 2.32 ohms/100 ft
dc Resistance Unbalance, maximum	4 %
Mutual Capacitance at Frequency	6.0 nF/100 m @ 1 kHz
Nominal Velocity of Propagation (NVP)	65 %
Operating Voltage, maximum	80 V
Safety Voltage Rating	300 V
Dielectric Strength, minimum	1500 Vac | 2500 Vdc
LP (Limited Power) Rating	0.6 A
Pulling Tension, maximum	11.34 kg | 25 lb
Installation Temperature	0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature	-20 °C to +60 °C (-4 °F to +140 °F)
Temperature Rating, ETL	75 °C | 167 °F
Flame Test Method	CMR | NEC Article 800 | UL 1666 | UL 444
Packaging Type	CommPak® box
Weight	56.61 kg/km | 38.04 lb/kft
CHINA-ROHS	Below maximum concentration value
REACH-SVHC	Compliant as per SVHC revision
ROHS	Compliant
UK-ROHS	Compliant

Applications

• Use it for high-performance data network horizontal cabling where Category 6A performance up to 500 MHz is required.
• Install it in non-plenum environments where CMR | NEC Article 800 | UL 1666 | UL 444 flame test methods are specified.
• Enable remote powering in LAN installations that follow IEEE 802.3bt (Type 4) recommendations when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A.

CommScope™ and all associated trademarks are the property of their respective owners.