Panduit LCC6-12-L, Two-Hole Copper Compression Lug 6 AWG 1/2 in. Stud

Panduit LCC6-12-L is a two-hole copper compression lug for 6 AWG conductor, drilled for 1/2 in. studs at 1.75 in. centers. The wide bolt spacing and large stud size put this lug on heavy pads and busbars even though the conductor itself is modest, which is what happens when a bonding jumper that has to land on hardware sized for far bigger cable. Two bolts hold the tongue against rotation, and the crimped barrel gives a termination with no fastener inside it to relax over thermal cycles.

Panduit LCC6-12-L Technical Specs

Product Classification

Product type	Compression lug
Mounting holes	Two
Termination method	Compression (crimp)

Conductor, Stud & Spacing

Conductor size	6 AWG
Stud hole size	1/2 in.
Hole spacing	1.75 in. (44.4mm)

Materials & Construction

Conductor Material	Copper

Panduit LCC6-12-L Applications

• Bonds a 6 AWG jumper to a busbar or equipment pad drilled for 1/2 in. hardware.
• Lands grounding conductors on switchgear and transformer pads sized for larger cable.
• Serves service-entrance and main bonding jumper terminations that specify two-hole lugs.
• Suits retrofits where new smaller conductor must meet an existing heavy bolt pattern.

Panduit™ and all associated trademarks are the property of their respective owners.