Southwire 13082301, Type SEU Service Entrance Cable 4-4-6 AWG Copper XHHW
Description
Southwire 13082301 is a Type SEU service entrance cable with copper conductors sized 4-4-6, its two 4 AWG phase conductors insulated XHHW (cross-linked polyethylene). A reinforcement binder sits under the PVC jacket, sunlight resistant. Rated 600 volts, for wet or dry locations at temperatures not exceeding 90°C.
Southwire 13082301 Technical Specs
Construction
| Conductor Sizes | 4-4-6 |
|---|---|
| Phase Conductor Size | 4 AWG |
| Number of Phase Conductors | 2 |
| Phase Conductor Strands | 7 |
| Conductor Material | Class B compressed stranded bare copper per ASTM B3 and ASTM B8 |
| Phase Insulation | Cross-linked polyethylene (XLPE), XHHW |
| Binder | Reinforcement binder |
| Jacket | PVC, sunlight resistant |
Dimensions and Weight
| Phase Conductor Diameter | 0.225 in (0.57 cm) |
|---|---|
| Phase Insulation Thickness | 45 mils (1.14 mm) |
| Jacket Thickness | 30 mils (0.76 mm) |
| Approx. Cross-Section (W x H) | 0.500 x 0.819 in (1.27 x 2.08 cm) |
| Copper Content Weight | 349 lbs/1000 ft (519 kg/km) |
| Approx. Total Weight | 431 lbs/1000 ft (641 kg/km) |
Ratings
| Voltage | 600 volts |
|---|---|
| Temperature | Wet or dry locations, not to exceed 90°C |
Standards
| ASTM B3 | Soft or Annealed Copper Wire |
|---|---|
| ASTM B8 | Concentric-Lay-Stranded Copper Conductors |
| UL 44 | Thermoset-Insulated Wires and Cables |
| UL 854 | Service Entrance Cable |
| RoHS-2 | European Directive 2011/65/EU |
| CE/RoHS-2 | The CE Marking has been applied solely to express the conformance to the material restrictions identified in the RoHS-2 (2011/65/EU) Directive |
| NEC | National Electrical Code, NFPA 70 |
| Federal Specification | A-A-59544 |
Southwire 13082301 Applications
- Carries power from the service drop to the meter base, and from the meter base to the distribution panelboard.
- It may be used in all applications where Type SE cable is permitted.
- Not for underground use: SE cables are not permitted underground, with or without a raceway, per NEC 338.12(A)(2).
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.