Southwire 37114601, Building Wire 10 AWG Stranded Copper XHHW-2 or SIS Blue
Description
Southwire 37114601 is a 10 AWG stranded copper building wire designated XHHW-2 or SIS, with blue cross-linked polyethylene (XLPE) insulation over a 7-strand bare copper conductor. It may be used in wet or dry locations at temperatures not exceeding 90°C, and XHHW-2 conductors are rated 600 volts or 1000 volts.
Southwire 37114601 Technical Specs
Construction
| Conductor Size | 10 AWG |
|---|---|
| Metric Cross-Section | 5.26 mm² |
| Conductor | Class B compressed stranded bare copper per ASTM B3 and ASTM B8 |
| Number of Strands | 7 |
| Insulation | Cross-linked polyethylene (XLPE) |
| Type Designation | XHHW-2 or SIS |
| Insulation Colour | Blue |
Dimensions and Weight
| Diameter Over Conductor | 0.113 in (0.29 cm) |
|---|---|
| Insulation Thickness | 30 mils (0.76 mm) |
| Approx. Overall Diameter | 0.173 in (0.44 cm) |
| Copper Content Weight | 32 lbs/1000 ft (48 kg/km) |
| Approx. Total Weight | 36 lbs/1000 ft (54 kg/km) |
Ratings
| Temperature | Wet or dry locations, not to exceed 90°C |
|---|
Features
| SIS | Sizes 14 AWG through 10 AWG |
|---|---|
| RoHS | Compliant |
Standards
| ASTM B3 | Soft or Annealed Copper Wire |
|---|---|
| ASTM B8 | Concentric-Lay-Stranded Copper Conductors |
| UL 44 | Thermoset-Insulated Wires and Cables |
| ICEA S-95-658 (NEMA WC70) | Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy |
| Federal Specification | A-A-59544 |
| NMX-J-451-ANCE | Thermoset insulated wires and cables |
| NOM-063-SCFI | Electrical Products – Conductors – Safety Requirements |
| NEMA 70901-2-2024 | Make It American Compliance with Domestic Preference Requirements Pt. 2 Wire & Cable |
Southwire's standards statement for this wire also reads: Made in America: Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661.
Southwire 37114601 Applications
- Runs in conduit or other recognized raceways, and in branch circuit wiring, as specified in the National Electrical Code.
- It is suitable for health care facilities under Section 517.160 of the National Electrical Code where a dielectric constant of less than 3.5 may be specified.
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.