Southwire 47824803, Bare Aluminum Conductor ACSS 397.5 KCMIL 26/7 IBIS
Southwire · MPN 47824803
Description
Southwire 47824803 is a bare 397.5 KCMIL ACSS (Aluminum Conductor, Steel Supported) overhead conductor with the codeword IBIS. Two or more layers of aluminum 1350-O wire, 26 strands in the fully annealed (soft) temper, are stranded around a 7-wire steel core that carries most or all of the mechanical load. Nominal outside diameter is 782 mils and nominal weight 546 lbs per 1000 ft.
Southwire 47824803 Technical Specs
Conductor
| Codeword | IBIS |
|---|---|
| Conductor Type | ACSS (Aluminum Conductor, Steel Supported) |
| Southwire Designation | 397.5-26/7 ACSS/MA2/63% IBIS |
| Conductor Size | 397.5 KCMIL |
| Stranding (Aluminum/Steel) | 26/7 |
| Aluminum Wire | 1350-O, fully annealed (soft) temper |
| Core Designation | MA2 |
| Steel Core Coating | Zinc-5% aluminum-mischmetal alloy |
Dimensions and Weight
| Nominal Outside Diameter | 782 mils (19.88 mm) |
|---|---|
| Nominal Total Weight | 546 lbs/1000 ft (813 kg/km) |
Standards
| ASTM B500 | Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B803 | High-Strength Zinc-5% Aluminum Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B856 | Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM B958 | Extra-High-Strength and Ultra-High-Strength Class A Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
Southwire 47824803 Applications
- Overhead distribution and transmission lines.
- The line operates continuously at elevated temperatures up to 250°C without loss of strength.
- It sags less than a comparable ACSR under electrical loadings, is self-damping if prestretched during installation, and its final sag is unaffected by long-term creep of the aluminum.
- Reconductoring where more current is needed at existing tensions and clearances, new lines where reduced sag lets structures be economized, new lines needing high emergency loadings, and lines where aeolian vibration is a problem.
- Corrosion protection should suit the environment the conductor will be exposed to.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.