Southwire 56965501, Type SHD-GC Mining Cable 8 AWG 3C Tinned Copper 2 kV Black
Description
Southwire 56965501 is an 8 AWG, three-conductor RHINOSHIELD™ Type SHD-GC mining cable rated 2 kV for trailing service. Its three 168-strand flexible rope-lay stranded tinned copper phase conductors carry ethylene propylene rubber (EPR) insulation. Two #10 grounding conductors and one #10 ground check conductor with yellow insulation run with them. A tin-coated copper braid shield with color-coded nylon surrounds each phase conductor, under a black chlorinated polyethylene (CPE) outer jacket.
The cable is MSHA Approved. Suitable for continuous submersion in water. Cold bend and impact tested to -50°C. The ground check conductor provides fail-safe ground monitoring. An embossed print legend identifies the cable.
Southwire 56965501 Technical Specs
Conductors & Insulation
| Conductor Size | 8 AWG |
|---|---|
| Phase Conductors | 3 |
| Strands per Conductor | 168 |
| Conductor | Tin-coated, annealed, flexible rope-lay stranded copper per ASTM B33/B172 |
| Insulation | Ethylene propylene rubber (EPR) |
| Insulation Thickness | 70 mils (1.78 mm) |
| Diameter Over Conductor | 0.153 in (0.39 cm) |
| Diameter Over Insulation | 0.301 in (0.76 cm) |
Grounding & Ground Check
| Grounding Conductors | Two #10 uninsulated, tin-coated, flexible rope-stranded copper |
|---|---|
| Ground Check Conductor | One #10 tin-coated, flexible rope-stranded copper with yellow polypropylene insulation |
Shielding & Jacket
| Separator Tape | Semi-conducting tape between conductor and insulation |
|---|---|
| Braid Shield | Tin-coated copper braid (60% minimum coverage) combined with color-coded nylon (40% maximum coverage) |
| Outer Jacket | Black chlorinated polyethylene (CPE) |
| Jacket Thickness | 145 mils (3.68 mm) |
Dimensions & Weight
| Approximate Outside Diameter | 1.093 in (2.78 cm) |
|---|---|
| Approximate Weight | 740 lbs/1000 ft (1101 kg/km) |
Ratings & Standards
| Voltage Rating | 2 kV |
|---|---|
| Type Designation | Type SHD-GC |
| Product Line | RHINOSHIELD™ |
| Standards | ASTM B33 Tin-Coated Soft or Annealed Copper Wire; ASTM B172 Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Copper Conductors; ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines; CSA C22.2 No. 96 Portable Power Cables |
Southwire 56965501 Applications
- Mobile, reeling or stationary mining equipment.
- Continuous mining machines and longwall mining systems.
- Blast hole drillers.
- Shovels, draglines, dredges and cranes.
- Marine shore-to-ship power supplies.
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.