Southwire 58020705, Building Wire 10 AWG Stranded Copper SIMpull THHN-THWN-2 MTW-AWM Gray with Brown Stripe
Description
Southwire 58020705 is a 10 AWG stranded copper single-conductor building wire with the type designation THHN-THWN-2 MTW-AWM. Its heat and moisture resistant PVC insulation is gray with a brown stripe, finished with a nylon sheath utilizing SIMpull Technology, and The wire is rated 600 volts for all applications. This SKU is supplied in a SIMpull CoilPAK Wire Payoff.
Southwire 58020705 Technical Specs
Conductor and Construction
| Conductor Size | 10 AWG |
|---|---|
| Number of Conductors | 1 |
| Strand Count | 19 |
| Conductor | Combination-unilay Class C stranded soft drawn annealed bare copper per ASTM B787 |
| Insulation | Heat and moisture resistant PVC |
| Insulation Colour | Gray with a brown stripe |
| Sheath | Nylon, utilizing SIMpull Technology |
| Type Designation | THHN-THWN-2 MTW-AWM |
| Package | SIMpull CoilPAK Wire Payoff |
Dimensions and Weight
| Diameter Over Conductor | 0.117 in (0.30 cm) |
|---|---|
| Insulation Thickness | 21 mils (0.53 mm) |
| Nylon Sheath Thickness | 5 mils (0.13 mm) |
| Approx. Overall Diameter | 0.165 in (0.42 cm) |
| Copper Content Weight | 32 lbs/1000 ft (48 kg/km) |
| Approx. Total Weight | 38 lbs/1000 ft (57 kg/km) |
Electrical and Temperature Ratings
| Voltage Rating | 600 volts, all applications |
|---|---|
| THHN | Dry locations, not to exceed 90°C |
| THWN-2 | Wet or dry locations, not to exceed 90°C, or 75°C when exposed to oil |
| MTW | Wet locations or exposure to oil, not to exceed 60°C; dry locations, not to exceed 90°C, with ampacity limited to that for 75°C conductor temperature per NFPA 79 |
| AWM | Dry locations, not to exceed 105°C, only when rated and used as appliance wiring material |
Standards
| ASTM B3 | Soft or Annealed Copper Wire |
|---|---|
| ASTM B787 | 19 Wire Combination Unilay-Stranded Copper Conductors |
| UL 83 | Thermoplastic Insulated Wires and Cables |
| NMX-J-010-ANCE | Thermoplastic insulated wires and cables |
| NOM-063-SCFI | Electrical Products – Conductors – Safety Requirements |
| NEMA 70901-2-2024 | Make It American Compliance with Domestic Preference Requirements Pt. 2 Wire & Cable |
Southwire 58020705 Applications
- Run in conduit for branch circuits in commercial or industrial installations, its primary use, as specified in the National Electrical Code and other applicable codes and standards.
- Pulls without a pulling lubricant.
- Dispensing from the CoilPAK payoff removes the need to handle bulky spools, along with the setup and effort that come with them.
- Less physical effort goes into handling the material, drawing wire out of the package and pulling it through conduit.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.