Southwire 58025905, Building Wire 10 AWG Stranded Copper SIMpull THHN-THWN-2 MTW-AWM Gray with Yellow Stripe
Description
Southwire 58025905 is a 10 AWG stranded copper SIMpull THHN-THWN-2 MTW-AWM building wire in gray with a yellow stripe, supplied on a SIMpull CoilPAK Wire Payoff. Its 19-strand combination-unilay Class C soft drawn annealed bare copper conductor carries heat and moisture resistant PVC insulation under a nylon sheath utilizing SIMpull Technology, and it installs without a pulling lubricant. Rated 600 volts for all applications.
Southwire 58025905 Technical Specs
Construction
| Conductor Size | 10 AWG |
|---|---|
| Conductor | Combination-unilay Class C stranded soft drawn annealed bare copper per ASTM B787 |
| Number of Strands | 19 |
| Insulation | Heat and moisture resistant PVC |
| Sheath | Nylon, utilizing SIMpull Technology |
| Type Designation | THHN-THWN-2 MTW-AWM |
| Insulation Colour | Gray with yellow stripe |
| Package | SIMpull CoilPAK Wire Payoff |
Dimensions and Weight
| Diameter Over Conductor | 0.117 in (0.30 cm) |
|---|---|
| Insulation Thickness | 21 mils (0.53 mm) |
| Nylon Sheath Thickness | 5 mils (0.13 mm) |
| Approx. Overall Diameter | 0.165 in (0.42 cm) |
| Copper Content Weight | 32 lbs/1000 ft (48 kg/km) |
| Approx. Total Weight | 38 lbs/1000 ft (57 kg/km) |
Ratings
| Voltage | 600 volts, all applications |
|---|---|
| THHN | Dry locations, not to exceed 90°C |
| THWN-2 | Wet or dry locations, not to exceed 90°C, or 75°C when exposed to oil |
| MTW | Wet locations or exposed to oil, not to exceed 60°C; dry locations, not to exceed 90°C (ampacity limited to that for 75°C conductor temperature per NFPA 79) |
| AWM | Dry locations, not to exceed 105°C, only when rated and used as appliance wiring material |
Standards
| ASTM B787 | 19 Wire Combination Unilay-Stranded Copper Conductors |
|---|---|
| UL 83 | Thermoplastic Insulated Wires and Cables |
| NMX-J-010-ANCE | Thermoplastic insulated wires and cables |
| NOM-063-SCFI | Electrical Products – Conductors – Safety Requirements |
| NEMA 70901-2-2024 | Make It American Compliance with Domestic Preference Requirements Pt. 2 Wire & Cable |
Southwire 58025905 Applications
- Installed in conduit for branch circuits in commercial or industrial applications, as specified in the National Electrical Code and other applicable codes and standards.
- Pays out from the CoilPAK package, so there are no bulky spools to handle and none of the setup that goes along with them.
- Reduces the physical effort of pulling wire out of the package and through conduit.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.