Southwire 61190323, Bare Aluminum Conductor ACSS/MA2 1590 KCMIL 54/19 FALCON
Description
Southwire 61190323 is an ACSS bare overhead conductor in 1590 KCMIL, codeword FALCON. It is built from 54 strands of aluminum 1350-O wire in the fully annealed (soft) temper, stranded in two or more layers around a steel core of 19 wires. Nominal outside diameter is 1544 mils and nominal total weight is 2042 lbs per 1000 ft. The steel core carries most or all of the mechanical load, and its wires are protected from corrosion by a zinc-5% aluminum-mischmetal alloy coating; corrosion protection should suit the environment the conductor will be exposed to.
Southwire 61190323 Technical Specs
Conductor
| Codeword | FALCON |
|---|---|
| Conductor Type | ACSS (Aluminum Conductor, Steel Supported) |
| Southwire Designation | 1590-54/19 ACSS/MA2/63% FALCON |
| Conductor Size | 1590 KCMIL |
| Stranding (Aluminum/Steel) | 54/19 |
| Aluminum Wire | 1350-O, fully annealed (soft) temper |
| Core Designation | MA2 |
| Core Wire Coating | Zinc-5% aluminum-mischmetal alloy |
Dimensions and Weight
| Nominal Outside Diameter | 1544 mils (39.23 mm) |
|---|---|
| Nominal Total Weight | 2042 lbs/1000 ft (3039 kg/km) |
Standards
Its ACSS conductor meets or exceeds the following ASTM specifications.
| ASTM B500 | Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B803 | High-Strength Zinc-5% Aluminum Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B856 | Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM B958 | Extra-High-Strength and Ultra-High-Strength Class A Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
Southwire 61190323 Applications
- ACSS is specified for overhead distribution and transmission lines.
- It is designed to operate continuously at elevated temperatures up to 250°C without loss of strength.
- Under electrical loadings it sags less than a comparable ACSR, and long-term creep of the aluminum does not affect its final sags.
- It is self-damping if prestretched during installation.
- Reconductoring that needs increased current with existing tensions and clearances, new lines where reduced conductor sag lets structures be economized, new lines requiring high emergency loadings, and lines where aeolian vibration is a problem.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.