Southwire 61325325, Bare Aluminum Conductor ACSS/MA3 (HS) 1272 KCMIL 54/19 PHEASANT
Description
Southwire 61325325 is an ACSS bare overhead conductor in 1272 KCMIL, codeword PHEASANT. It is built from 54 strands of aluminum 1350-O wire, stranded in layers around a steel core of 19 wires. Nominal outside diameter is 1381 mils and nominal total weight is 1634 lbs per 1000 ft.
Southwire 61325325 Key Features
- With the aluminum in the fully annealed, soft temper, the steel core carries most or all of the conductor's mechanical load.
- The steel core wires are protected from corrosion by a zinc-5% aluminum-mischmetal alloy coating.
- Corrosion protection should suit the environment the conductor will be exposed to.
Southwire 61325325 Technical Specs
Conductor
| Codeword | PHEASANT |
|---|---|
| Conductor Type | ACSS (Aluminum Conductor, Steel Supported) |
| Southwire Designation | 1272-54/19 ACSS/MA3 (HS)/63% PHEASANT |
| Conductor Size | 1272 KCMIL |
| Stranding (Aluminum/Steel) | 54/19 |
| Aluminum Wire | 1350-O, fully annealed (soft) temper |
| Core Designation | MA3 (HS) |
Dimensions and Weight
| Nominal Outside Diameter | 1381 mils (35.09 mm) |
|---|---|
| Nominal Total Weight | 1634 lbs/1000 ft (2431 kg/km) |
Standards
Its ACSS conductor meets or exceeds the following ASTM specifications.
| ASTM B500 | Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B803 | High-Strength Zinc-5% Aluminum Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B856 | Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM B958 | Extra-High-Strength and Ultra-High-Strength Class A Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
Southwire 61325325 Applications
- ACSS is used for overhead distribution and transmission lines.
- It is designed to operate continuously at elevated temperatures up to 250°C without loss of strength.
- Under electrical loading it sags less than a comparable ACSR, and its final sags are not affected by long-term creep of the aluminum.
- It is self-damping when prestretched during installation.
- Reconductoring that calls for increased current at existing tensions and clearances, new lines where reduced sag lets structures be economized, new lines needing high emergency loadings, and lines where aeolian vibration is a problem.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.