Southwire 61335925, Bare Aluminum Conductor ACSS/TW/MA3 (HS) 1622 KCMIL 39/19 PECOS
Description
Southwire 61335925 is an ACSS/TW bare overhead conductor in 1622 KCMIL, codeword PECOS, Type 13. It is built from 39 trapezoidal-shaped strands of 63% minimum average conductivity aluminum 1350-0 wire, stranded in layers around a steel core of 19 wires. Nominal outside diameter is 1420 mils and nominal total weight is 2107 lbs per 1000 ft.
Southwire 61335925 Key Features
- With the aluminum in the fully annealed, soft temper, the steel core carries most or all of the conductor's mechanical load.
- Corrosion protection on the steel core wires is Galfan, a zinc-5% aluminum-mischmetal alloy coating.
Southwire 61335925 Technical Specs
Conductor
| Codeword | PECOS |
|---|---|
| Conductor Type | ACSS/TW (Aluminum Conductor, Steel Supported, Trapezoidal Shaped Aluminum Strands) |
| Southwire Designation | 1622-39/19 TYPE 13 ACSS/TW/MA3 (HS)/63% PECOS |
| TW Type | Type 13 |
| Conductor Size | 1622 KCMIL |
| Stranding (Aluminum/Steel) | 39/19 |
| Aluminum Wire | 1350-0, 63% minimum average conductivity, fully annealed (soft) temper, trapezoidal shaped |
| Core Designation | MA3 (HS) |
| Core Wire Coating | Galfan, zinc-5% aluminum-mischmetal alloy |
Dimensions and Weight
| Nominal Outside Diameter | 1420 mils (36.07 mm) |
|---|---|
| Nominal Total Weight | 2107 lbs/1000 ft (3135 kg/km) |
Standards
Its ACSS/TW conductor meets or exceeds the following ASTM specifications.
| ASTM B500 | Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced |
| ASTM B803 | High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B857 | Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
Southwire 61335925 Applications
- ACSS/TW is for overhead distribution and transmission lines.
- It is designed to operate continuously at elevated temperatures up to 250°C without loss of strength.
- It sags less under emergency electrical loadings than ACSR/TW, and long-term creep of the aluminum does not affect its final sags.
- The construction has excellent self-damping properties.
- For new line construction, design opportunities include reduced tower cost, decreased sag, increased operating temperature and improved corrosion resistance.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.