Southwire 61393354, Bare Aluminum Conductor VR2 2/C ACSR 4/0 AWG 6/1 PENGUIN
Description
Southwire 61393354 twists two identical bare 4/0 AWG ACSR PENGUIN subconductors, each of 6 aluminum strands around a single steel wire, into a left-hand-lay VR2 cable with a figure 8 spiral profile. The continuously changing projected diameter it presents to the wind disrupts the steady cross-wind forces that cause vibration, and the reduced torsional stiffness and varying bending stiffness reduce or eliminate galloping under ice and wind. Nominal outside diameter (1126 mils) and weight (582 lbs per 1000 ft) are for the twisted assembly; size, stranding and codeword are per subconductor.
Southwire 61393354 Technical Specs
Subconductors (each of two)
| Codeword | PENGUIN |
|---|---|
| Subconductor Type | ACSR |
| Southwire Designation | 2/C (4/0-6/1) VR2 ACSR/GA2 PENGUIN |
| Conductor Size (each subconductor) | 4/0 AWG |
| Stranding (Aluminum/Steel, each subconductor) | 6/1 |
| Core Designation | GA2 |
Twisted Assembly
| Conductors in Assembly | 2, twisted together with a left-hand lay |
|---|---|
| Nominal Outside Diameter | 1126 mils (28.62 mm) |
| Nominal Total Weight | 582 lbs/1000 ft (866 kg/km) |
Standards (for the subconductor of each assembly)
| ASTM B-231 | Aluminum Conductor, Concentric-Lay-Stranded |
|---|---|
| ASTM B-232 | Aluminum Conductor, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR) |
Southwire 61393354 Applications
- VR2 is for overhead applications where wind and ice cause aeolian vibration and galloping.
- It can be strung to the maximum allowable tension limits without added vibration protection.
- Installation without bagging comes from a lay length that changes with conductor diameter.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.