Southwire 62554701, Bare Aluminum Conductor ACSS/MA3 (HS) 636 KCMIL 22/7 GOLDFINCH
Description
Southwire 62554701 is an ACSS bare overhead conductor in 636 KCMIL, codeword GOLDFINCH. It is built from 22 strands of aluminum 1350-O wire, stranded in layers around a steel core of 7 wires. Nominal outside diameter is 963 mils and nominal total weight is 765 lbs per 1000 ft. With the aluminum in the fully annealed, soft temper, the steel core carries most or all of the mechanical load; the core wires are protected from corrosion by a zinc-5% aluminum-mischmetal alloy coating, and Corrosion protection should suit the environment the conductor will be exposed to.
Southwire 62554701 Technical Specs
Conductor
| Codeword | GOLDFINCH |
|---|---|
| Conductor Type | ACSS (Aluminum Conductor, Steel Supported) |
| Southwire Designation | 636-22/7 ACSS/MA3 (HS)/63% GOLDFINCH |
| Conductor Size | 636 KCMIL |
| Stranding (Aluminum/Steel) | 22/7 |
| Aluminum Wire | 1350-O, fully annealed (soft) temper |
| Core Designation | MA3 (HS) |
| Core Wire Coating | Zinc-5% aluminum-mischmetal alloy |
Dimensions and Weight
| Nominal Outside Diameter | 963 mils (24.47 mm) |
|---|---|
| Nominal Total Weight | 765 lbs/1000 ft (1138 kg/km) |
Standards
Its ACSS conductor meets or exceeds the following ASTM specifications.
| ASTM B500 | Metallic Coated Stranded Steel Core for Use in Overhead Electrical Conductors |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) |
| ASTM B803 | High-Strength Zinc-5% Aluminum Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
| ASTM B856 | Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS) |
| ASTM B958 | Extra-High-Strength and Ultra-High-Strength Class A Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors |
Southwire 62554701 Applications
- ACSS is used for overhead distribution and transmission lines.
- It is designed to operate continuously at elevated temperatures up to 250°C without loss of strength.
- Under electrical loading it sags less than a comparable ACSR, and its final sags are not affected by long-term creep of the aluminum.
- It is self-damping when prestretched during installation.
- Reconductoring that calls for increased current at existing tensions and clearances, new lines where reduced sag lets structures be economized, new lines needing high emergency loadings, and lines where aeolian vibration is a problem.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.