Southwire 62662337, Bare Aluminum Conductor ACSS/TW/MA3 (HS) 768.2 KCMIL 20/7 MAUMEE
Description
Southwire 62662337 is an ACSS/TW bare overhead conductor in 768.2 KCMIL, codeword MAUMEE, Type 13 design. It is built from 20 trapezoidal-shaped strands of 63% minimum average conductivity aluminum 1350-0 wire in the fully annealed (soft) temper, stranded in layers around a steel core of 7 wires. Nominal outside diameter is 977 mils and nominal total weight is 987 lbs per 1000 ft. Because the aluminum is soft temper, the steel core carries most or all of the mechanical load, and its wires are protected from corrosion by Galfan, a zinc-5% aluminum-mischmetal alloy coating.
Southwire 62662337 Technical Specs
Conductor
| Codeword | MAUMEE |
|---|---|
| Conductor Type | ACSS/TW (Aluminum Conductor, Steel Supported, Trapezoidal Shaped Aluminum Strands) |
| Southwire Designation | 768.2-20/7 TYPE 13 ACSS/TW/MA3 (HS)/63% MAUMEE |
| Design | Type 13 |
| Conductor Size | 768.2 KCMIL |
| Stranding (Aluminum/Steel) | 20/7 |
| Aluminum Wire | 1350-0, 63% minimum average conductivity, fully annealed (soft) temper, trapezoidal shaped |
| Core Designation | MA3 (HS) |
| Core Wire Coating | Galfan, zinc-5% aluminum-mischmetal alloy |
Dimensions and Weight
| Nominal Outside Diameter | 977 mils (24.82 mm) |
|---|---|
| Nominal Total Weight | 987 lbs/1000 ft (1469 kg/km) |
Standards
Its ACSS/TW conductor meets or exceeds the following ASTM specifications.
| ASTM B500 | Metallic Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced |
|---|---|
| ASTM B609 | Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes |
| ASTM B802 | Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced |
| ASTM B803 | High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B857 | Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW) |
Southwire 62662337 Applications
- ACSS/TW is for overhead distribution and transmission lines.
- It is designed to operate continuously at elevated temperatures up to 250°C without loss of strength.
- Under emergency electrical loadings it sags less than ACSR/TW, and long-term creep of the aluminum does not affect its final sags.
- The conductor has excellent self-damping properties.
- For new line construction, design opportunities include reduced tower cost, decreased sag, increased self-damping, increased operating temperature and improved corrosion resistance.
Documents
Images are for reference only. Specifications may change without notice — verify suitability for your application before purchase. The manufacturer's documentation controls.
Need a cut length, bulk pricing, or a spec sheet?
Our team quotes custom lengths and volume orders, usually same day.